4 @anchor{Release 1_22_0}
5 @section Release 1.22.0
8 @code{flock} locks replaced with POSIX @code{fcntl} ones.
9 They could be more portable.
12 @anchor{Release 1_21_0}
13 @section Release 1.21.0
16 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
17 environment variable, that takes either @code{none}, or @code{ctime}
18 (the default one), or @code{mtime} (new one). Check documentation's
19 separate page about that option.
22 @anchor{Release 1_20_0}
23 @section Release 1.20.0
26 Print warning message if both ifcreate and ifchange records were
27 discovered after the target is done.
30 @anchor{Release 1_19_0}
31 @section Release 1.19.0
34 Skip target itself, when searching for corresponding @file{.do}
35 file. For example @file{default.do} must use @file{../default.do}
39 @anchor{Release 1_18_0}
40 @section Release 1.18.0
43 Fix regression of known OODs passing since 1.3.0, that leads to
44 rebuilding of already built targets.
47 @anchor{Release 1_17_0}
48 @section Release 1.17.0
51 If @command{redo*} process is killed, then it sends @code{SIGTERM}
52 to all his children too, properly terminating the whole job queue.
55 @anchor{Release 1_16_0}
56 @section Release 1.16.0
59 Unexistent targets are considered always out-of-date, as it should be.
61 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
64 @anchor{Release 1_15_0}
65 @section Release 1.15.0
68 Explicitly check if @code{$1} target is touched and then fail.
69 Previously we check if @code{$1} was only altered.
72 @anchor{Release 1_14_0}
73 @section Release 1.14.0
76 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
79 @anchor{Release 1_13_0}
80 @section Release 1.13.0
83 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
84 won't collide with already existing @file{.log} and @file{.rec} in
85 @file{.redo} directory.
88 @anchor{Release 1_12_0}
89 @section Release 1.12.0
92 Fix possible lack of success finish message printing if any of
96 @anchor{Release 1_11_0}
97 @section Release 1.11.0
100 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
103 @anchor{Release 1_10_0}
104 @section Release 1.10.0
107 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
109 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
112 @anchor{Release 1_9_0}
113 @section Release 1.9.0
116 Do not enable command line options not applicable to the command.
117 For example @option{-j} option is only applicable to @command{redo}
118 and @command{redo-ifchange} commands.
121 @item @option{-dry-run} option is renamed to @option{-n}
122 @item @option{-logs} option is renamed to @option{-k}
123 @item @option{-silent} option is renamed to @option{-s}
126 When @code{stderr} logs are kept, all environment variables, working
127 directory, command line arguments, start/finish times, duration,
128 participated PIDs, return codes are saved in corresponding
129 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
130 @option{-c} option to @command{redo-log}.
132 @command{redo-log}'s @option{-r} option allows recursive, indented
133 viewing of the whole redo commands invocations for the given target
137 @anchor{Release 1_8_0}
138 @section Release 1.8.0
141 Fixed possibly wrong relative path record of the dependency, when
142 redo commands are run in different directory from the @file{.do}.
144 Fixed possible failing in @command{redo-sources} if no @file{.dep}
148 @anchor{Release 1_7_0}
149 @section Release 1.7.0
152 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
153 with either NetBSD's bmake or GNU Make jobserver protocols, being
154 able to tightly integrate @command{goredo} with the @command{make}.
157 @anchor{Release 1_6_0}
158 @section Release 1.6.0
161 @command{redo-affects} command appeared, that shows all targets that
162 will be affected by changing the specified ones.
165 @anchor{Release 1_5_0}
166 @section Release 1.5.0
169 @command{redo-ood}, @command{redo-sources} and
170 @command{redo-targets} can optionally take list of targets to apply
171 the command on, to narrow the result.
173 @command{redo-sources} mistakenly missed @file{.do} files in the output.
175 @command{redo-sources} now recursively searches for all source
176 files, not the "first" depth level ones.
179 @anchor{Release 1_4_1}
180 @section Release 1.4.1
183 Even more simpler statusline cleaning function.
186 @anchor{Release 1_4_0}
187 @section Release 1.4.0
190 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
191 previously was not applied to all targets.
193 Simpler statusline cleaning function, does not leading to whitespace
194 junk after long lines.
196 Updated dependant libraries.
199 @anchor{Release 1_3_0}
200 @section Release 1.3.0
203 Experimental @command{redo-sources}, @command{redo-targets} and
204 @command{redo-ood} commands.
206 Repetitive OOD determination optimization: pass all already known to
207 be OOD targets to redoing targets.
210 @anchor{Release 1_2_0}
211 @section Release 1.2.0
214 Dependency files @file{.dep} extension changed to @file{.rec}, to
215 reflect its recfile format nature and editors file type better
218 Reduce number of file descriptors kept open (1 instead of 4) while
219 waiting for job slot token.
222 @anchor{Release 1_1_0}
223 @section Release 1.1.0
226 @command{redo-cleanup} has @option{-dry-run} option.
229 @anchor{Release 1_0_0}
230 @section Release 1.0.0
233 @code{Size} is stored in the state, for faster OOD detection.
234 Previous @command{goredo} state files won't work.
236 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
237 trust to file inode's information (except for its size), forcing its
240 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
243 @anchor{Release 0_12_3}
244 @section Release 0.12.3
247 Use an updated @code{lukechampine.com/blake3} with possibly working
251 @anchor{Release 0_12_2}
252 @section Release 0.12.2
255 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
257 Fixed tests permissions in the tarball.
260 @anchor{Release 0_12_1}
261 @section Release 0.12.1
264 Tarball uses @file{vendor} directory without @env{$GOPATH}
265 overriding. @command{goredo} and its dependencies anyway uses Go
266 1.12+ versions, that have @file{vendor}-ing support.
269 @anchor{Release 0_12_0}
270 @section Release 0.12.0
273 Do not forget to save even output-less target as a dependency.
275 @option{-debug} option renamed to shorter @option{-d}.
278 @anchor{Release 0_11_0}
279 @section Release 0.11.0
282 Previously @env{$REDO_JOBS} overrided even explicitly specified
283 @option{-j} option. Fix that behaviour -- command line options must
284 precede environment variables.
285 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
286 BLAKE2b hashing algorithm for even better performance.
289 @anchor{Release 0_10_0}
290 @section Release 0.10.0
292 @item Initial tarballed release.