5 @anchor{Release 1_28_0}
6 @section Release 1.28.0
9 Do not remove @file{.lock} files, that leads to possible races
10 between running targets. Although @command{nncp-cleanup lock}
11 can be used to cleanup.
14 @anchor{Release 1_27_1}
15 @section Release 1.27.1
18 Fixed lack of @file{.redo.}-prefix in temporary file names.
21 @anchor{Release 1_27_0}
22 @section Release 1.27.0
25 Improved out-of-date check and @file{.do} files search performance,
26 because of caching their results.
29 @anchor{Release 1_26_0}
30 @section Release 1.26.0
33 Debug output contained colour-related attribute even if
34 @env{$NO_COLOR=1} was set.
36 Updated dependant libraries.
39 @anchor{Release 1_25_0}
40 @section Release 1.25.0
43 Target's lock file requires a token from the jobserver now. So
44 amount of simultaneously opened lock files depends on job slots
48 @anchor{Release 1_24_0}
49 @section Release 1.24.0
52 @command{redo-cleanup tmp} also removes temporarily (@code{$3})
56 @anchor{Release 1_23_0}
57 @section Release 1.23.0
60 @command{redo-ifchange}'s @option{-f} option forces each target
61 rebuilding. Comparing to @command{redo}, it will parallelize the
64 Inode's number is also stored as dependency information, just to
65 prevent possible @code{ctime} collision of two files.
67 Performance optimization: do not use target's temporary output file
68 at all, if its hash equals to already existing target's one. Just
69 touch existing target file instead.
72 @anchor{Release 1_22_0}
73 @section Release 1.22.0
76 @code{flock} locks replaced with POSIX @code{fcntl} ones.
77 They could be more portable.
79 @command{redo-depfix} command appeared, that traverses through all
80 @file{.redo} directories and their dependency files, checks if
81 corresponding targets has the same content but different
82 @code{ctime}/@code{mtime} values and rewrites dependencies with that
83 updated inode information.
85 With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
86 stop and fail if it meet externally modified file. By default user
87 is only warned about it, but building continues for convenience.
90 @anchor{Release 1_21_0}
91 @section Release 1.21.0
94 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
95 environment variable, that takes either @code{none}, or @code{ctime}
96 (the default one), or @code{mtime} (new one). Check documentation's
97 separate page about that option.
100 @anchor{Release 1_20_0}
101 @section Release 1.20.0
104 Print warning message if both ifcreate and ifchange records were
105 discovered after the target is done.
108 @anchor{Release 1_19_0}
109 @section Release 1.19.0
112 Skip target itself, when searching for corresponding @file{.do}
113 file. For example @file{default.do} must use @file{../default.do}
117 @anchor{Release 1_18_0}
118 @section Release 1.18.0
121 Fix regression of known OODs passing since 1.3.0, that leads to
122 rebuilding of already built targets.
125 @anchor{Release 1_17_0}
126 @section Release 1.17.0
129 If @command{redo*} process is killed, then it sends @code{SIGTERM}
130 to all his children too, properly terminating the whole job queue.
133 @anchor{Release 1_16_0}
134 @section Release 1.16.0
137 Unexistent targets are considered always out-of-date, as it should be.
139 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
142 @anchor{Release 1_15_0}
143 @section Release 1.15.0
146 Explicitly check if @code{$1} target is touched and then fail.
147 Previously we check if @code{$1} was only altered.
150 @anchor{Release 1_14_0}
151 @section Release 1.14.0
154 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
157 @anchor{Release 1_13_0}
158 @section Release 1.13.0
161 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
162 won't collide with already existing @file{.log} and @file{.rec} in
163 @file{.redo} directory.
166 @anchor{Release 1_12_0}
167 @section Release 1.12.0
170 Fix possible lack of success finish message printing if any of
174 @anchor{Release 1_11_0}
175 @section Release 1.11.0
178 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
181 @anchor{Release 1_10_0}
182 @section Release 1.10.0
185 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
187 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
190 @anchor{Release 1_9_0}
191 @section Release 1.9.0
194 Do not enable command line options not applicable to the command.
195 For example @option{-j} option is only applicable to @command{redo}
196 and @command{redo-ifchange} commands.
199 @item @option{-dry-run} option is renamed to @option{-n}
200 @item @option{-logs} option is renamed to @option{-k}
201 @item @option{-silent} option is renamed to @option{-s}
204 When @code{stderr} logs are kept, all environment variables, working
205 directory, command line arguments, start/finish times, duration,
206 participated PIDs, return codes are saved in corresponding
207 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
208 @option{-c} option to @command{redo-log}.
210 @command{redo-log}'s @option{-r} option allows recursive, indented
211 viewing of the whole redo commands invocations for the given target
215 @anchor{Release 1_8_0}
216 @section Release 1.8.0
219 Fixed possibly wrong relative path record of the dependency, when
220 redo commands are run in different directory from the @file{.do}.
222 Fixed possible failing in @command{redo-sources} if no @file{.dep}
226 @anchor{Release 1_7_0}
227 @section Release 1.7.0
230 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
231 with either NetBSD's bmake or GNU Make jobserver protocols, being
232 able to tightly integrate @command{goredo} with the @command{make}.
235 @anchor{Release 1_6_0}
236 @section Release 1.6.0
239 @command{redo-affects} command appeared, that shows all targets that
240 will be affected by changing the specified ones.
243 @anchor{Release 1_5_0}
244 @section Release 1.5.0
247 @command{redo-ood}, @command{redo-sources} and
248 @command{redo-targets} can optionally take list of targets to apply
249 the command on, to narrow the result.
251 @command{redo-sources} mistakenly missed @file{.do} files in the output.
253 @command{redo-sources} now recursively searches for all source
254 files, not the "first" depth level ones.
257 @anchor{Release 1_4_1}
258 @section Release 1.4.1
261 Even more simpler statusline cleaning function.
264 @anchor{Release 1_4_0}
265 @section Release 1.4.0
268 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
269 previously was not applied to all targets.
271 Simpler statusline cleaning function, does not leading to whitespace
272 junk after long lines.
274 Updated dependant libraries.
277 @anchor{Release 1_3_0}
278 @section Release 1.3.0
281 Experimental @command{redo-sources}, @command{redo-targets} and
282 @command{redo-ood} commands.
284 Repetitive OOD determination optimization: pass all already known to
285 be OOD targets to redoing targets.
288 @anchor{Release 1_2_0}
289 @section Release 1.2.0
292 Dependency files @file{.dep} extension changed to @file{.rec}, to
293 reflect its recfile format nature and editors file type better
296 Reduce number of file descriptors kept open (1 instead of 4) while
297 waiting for job slot token.
300 @anchor{Release 1_1_0}
301 @section Release 1.1.0
304 @command{redo-cleanup} has @option{-dry-run} option.
307 @anchor{Release 1_0_0}
308 @section Release 1.0.0
311 @code{Size} is stored in the state, for faster OOD detection.
312 Previous @command{goredo} state files won't work.
314 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
315 trust to file inode's information (except for its size), forcing its
318 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
321 @anchor{Release 0_12_3}
322 @section Release 0.12.3
325 Use an updated @code{lukechampine.com/blake3} with possibly working
329 @anchor{Release 0_12_2}
330 @section Release 0.12.2
333 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
335 Fixed tests permissions in the tarball.
338 @anchor{Release 0_12_1}
339 @section Release 0.12.1
342 Tarball uses @file{vendor} directory without @env{$GOPATH}
343 overriding. @command{goredo} and its dependencies anyway uses Go
344 1.12+ versions, that have @file{vendor}-ing support.
347 @anchor{Release 0_12_0}
348 @section Release 0.12.0
351 Do not forget to save even output-less target as a dependency.
353 @option{-debug} option renamed to shorter @option{-d}.
356 @anchor{Release 0_11_0}
357 @section Release 0.11.0
360 Previously @env{$REDO_JOBS} overrided even explicitly specified
361 @option{-j} option. Fix that behaviour -- command line options must
362 precede environment variables.
363 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
364 BLAKE2b hashing algorithm for even better performance.
367 @anchor{Release 0_10_0}
368 @section Release 0.10.0
370 @item Initial tarballed release.