5 @anchor{Release 1_23_0}
6 @section Release 1.23.0
9 @command{redo-ifchange}'s @option{-f} option forces each target
10 rebuilding. Comparing to @command{redo}, it will parallelize the
13 Inode's number is also stored as dependency information, just to
14 prevent possible @code{ctime} collision of two files.
17 @anchor{Release 1_22_0}
18 @section Release 1.22.0
21 @code{flock} locks replaced with POSIX @code{fcntl} ones.
22 They could be more portable.
24 @command{redo-depfix} command appeared, that traverses through all
25 @file{.redo} directories and their dependency files, checks if
26 corresponding targets has the same content but different
27 @code{ctime}/@code{mtime} values and rewrites dependencies with that
28 updated inode information.
30 With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
31 stop and fail if it meet externally modified file. By default user
32 is only warned about it, but building continues for convenience.
35 @anchor{Release 1_21_0}
36 @section Release 1.21.0
39 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
40 environment variable, that takes either @code{none}, or @code{ctime}
41 (the default one), or @code{mtime} (new one). Check documentation's
42 separate page about that option.
45 @anchor{Release 1_20_0}
46 @section Release 1.20.0
49 Print warning message if both ifcreate and ifchange records were
50 discovered after the target is done.
53 @anchor{Release 1_19_0}
54 @section Release 1.19.0
57 Skip target itself, when searching for corresponding @file{.do}
58 file. For example @file{default.do} must use @file{../default.do}
62 @anchor{Release 1_18_0}
63 @section Release 1.18.0
66 Fix regression of known OODs passing since 1.3.0, that leads to
67 rebuilding of already built targets.
70 @anchor{Release 1_17_0}
71 @section Release 1.17.0
74 If @command{redo*} process is killed, then it sends @code{SIGTERM}
75 to all his children too, properly terminating the whole job queue.
78 @anchor{Release 1_16_0}
79 @section Release 1.16.0
82 Unexistent targets are considered always out-of-date, as it should be.
84 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
87 @anchor{Release 1_15_0}
88 @section Release 1.15.0
91 Explicitly check if @code{$1} target is touched and then fail.
92 Previously we check if @code{$1} was only altered.
95 @anchor{Release 1_14_0}
96 @section Release 1.14.0
99 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
102 @anchor{Release 1_13_0}
103 @section Release 1.13.0
106 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
107 won't collide with already existing @file{.log} and @file{.rec} in
108 @file{.redo} directory.
111 @anchor{Release 1_12_0}
112 @section Release 1.12.0
115 Fix possible lack of success finish message printing if any of
119 @anchor{Release 1_11_0}
120 @section Release 1.11.0
123 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
126 @anchor{Release 1_10_0}
127 @section Release 1.10.0
130 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
132 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
135 @anchor{Release 1_9_0}
136 @section Release 1.9.0
139 Do not enable command line options not applicable to the command.
140 For example @option{-j} option is only applicable to @command{redo}
141 and @command{redo-ifchange} commands.
144 @item @option{-dry-run} option is renamed to @option{-n}
145 @item @option{-logs} option is renamed to @option{-k}
146 @item @option{-silent} option is renamed to @option{-s}
149 When @code{stderr} logs are kept, all environment variables, working
150 directory, command line arguments, start/finish times, duration,
151 participated PIDs, return codes are saved in corresponding
152 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
153 @option{-c} option to @command{redo-log}.
155 @command{redo-log}'s @option{-r} option allows recursive, indented
156 viewing of the whole redo commands invocations for the given target
160 @anchor{Release 1_8_0}
161 @section Release 1.8.0
164 Fixed possibly wrong relative path record of the dependency, when
165 redo commands are run in different directory from the @file{.do}.
167 Fixed possible failing in @command{redo-sources} if no @file{.dep}
171 @anchor{Release 1_7_0}
172 @section Release 1.7.0
175 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
176 with either NetBSD's bmake or GNU Make jobserver protocols, being
177 able to tightly integrate @command{goredo} with the @command{make}.
180 @anchor{Release 1_6_0}
181 @section Release 1.6.0
184 @command{redo-affects} command appeared, that shows all targets that
185 will be affected by changing the specified ones.
188 @anchor{Release 1_5_0}
189 @section Release 1.5.0
192 @command{redo-ood}, @command{redo-sources} and
193 @command{redo-targets} can optionally take list of targets to apply
194 the command on, to narrow the result.
196 @command{redo-sources} mistakenly missed @file{.do} files in the output.
198 @command{redo-sources} now recursively searches for all source
199 files, not the "first" depth level ones.
202 @anchor{Release 1_4_1}
203 @section Release 1.4.1
206 Even more simpler statusline cleaning function.
209 @anchor{Release 1_4_0}
210 @section Release 1.4.0
213 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
214 previously was not applied to all targets.
216 Simpler statusline cleaning function, does not leading to whitespace
217 junk after long lines.
219 Updated dependant libraries.
222 @anchor{Release 1_3_0}
223 @section Release 1.3.0
226 Experimental @command{redo-sources}, @command{redo-targets} and
227 @command{redo-ood} commands.
229 Repetitive OOD determination optimization: pass all already known to
230 be OOD targets to redoing targets.
233 @anchor{Release 1_2_0}
234 @section Release 1.2.0
237 Dependency files @file{.dep} extension changed to @file{.rec}, to
238 reflect its recfile format nature and editors file type better
241 Reduce number of file descriptors kept open (1 instead of 4) while
242 waiting for job slot token.
245 @anchor{Release 1_1_0}
246 @section Release 1.1.0
249 @command{redo-cleanup} has @option{-dry-run} option.
252 @anchor{Release 1_0_0}
253 @section Release 1.0.0
256 @code{Size} is stored in the state, for faster OOD detection.
257 Previous @command{goredo} state files won't work.
259 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
260 trust to file inode's information (except for its size), forcing its
263 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
266 @anchor{Release 0_12_3}
267 @section Release 0.12.3
270 Use an updated @code{lukechampine.com/blake3} with possibly working
274 @anchor{Release 0_12_2}
275 @section Release 0.12.2
278 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
280 Fixed tests permissions in the tarball.
283 @anchor{Release 0_12_1}
284 @section Release 0.12.1
287 Tarball uses @file{vendor} directory without @env{$GOPATH}
288 overriding. @command{goredo} and its dependencies anyway uses Go
289 1.12+ versions, that have @file{vendor}-ing support.
292 @anchor{Release 0_12_0}
293 @section Release 0.12.0
296 Do not forget to save even output-less target as a dependency.
298 @option{-debug} option renamed to shorter @option{-d}.
301 @anchor{Release 0_11_0}
302 @section Release 0.11.0
305 Previously @env{$REDO_JOBS} overrided even explicitly specified
306 @option{-j} option. Fix that behaviour -- command line options must
307 precede environment variables.
308 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
309 BLAKE2b hashing algorithm for even better performance.
312 @anchor{Release 0_10_0}
313 @section Release 0.10.0
315 @item Initial tarballed release.