@node News
+@cindex news
@unnumbered News
-@anchor{Release 1.9.0}
+@anchor{Release 1_24_0}
+@section Release 1.24.0
+@itemize
+@item
+ @command{redo-cleanup tmp} also removes temporarily (@code{$3})
+ created directories.
+@end itemize
+
+@anchor{Release 1_23_0}
+@section Release 1.23.0
+@itemize
+@item
+ @command{redo-ifchange}'s @option{-f} option forces each target
+ rebuilding. Comparing to @command{redo}, it will parallelize the
+ process.
+@item
+ Inode's number is also stored as dependency information, just to
+ prevent possible @code{ctime} collision of two files.
+@item
+ Performance optimization: do not use target's temporary output file
+ at all, if its hash equals to already existing target's one. Just
+ touch existing target file instead.
+@end itemize
+
+@anchor{Release 1_22_0}
+@section Release 1.22.0
+@itemize
+@item
+ @code{flock} locks replaced with POSIX @code{fcntl} ones.
+ They could be more portable.
+@item
+ @command{redo-depfix} command appeared, that traverses through all
+ @file{.redo} directories and their dependency files, checks if
+ corresponding targets has the same content but different
+ @code{ctime}/@code{mtime} values and rewrites dependencies with that
+ updated inode information.
+@item
+ With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
+ stop and fail if it meet externally modified file. By default user
+ is only warned about it, but building continues for convenience.
+@end itemize
+
+@anchor{Release 1_21_0}
+@section Release 1.21.0
+@itemize
+@item
+ @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
+ environment variable, that takes either @code{none}, or @code{ctime}
+ (the default one), or @code{mtime} (new one). Check documentation's
+ separate page about that option.
+@end itemize
+
+@anchor{Release 1_20_0}
+@section Release 1.20.0
+@itemize
+@item
+ Print warning message if both ifcreate and ifchange records were
+ discovered after the target is done.
+@end itemize
+
+@anchor{Release 1_19_0}
+@section Release 1.19.0
+@itemize
+@item
+ Skip target itself, when searching for corresponding @file{.do}
+ file. For example @file{default.do} must use @file{../default.do}
+ instead of the self.
+@end itemize
+
+@anchor{Release 1_18_0}
+@section Release 1.18.0
+@itemize
+@item
+ Fix regression of known OODs passing since 1.3.0, that leads to
+ rebuilding of already built targets.
+@end itemize
+
+@anchor{Release 1_17_0}
+@section Release 1.17.0
+@itemize
+@item
+ If @command{redo*} process is killed, then it sends @code{SIGTERM}
+ to all his children too, properly terminating the whole job queue.
+@end itemize
+
+@anchor{Release 1_16_0}
+@section Release 1.16.0
+@itemize
+@item
+ Unexistent targets are considered always out-of-date, as it should be.
+@item
+ Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
+@end itemize
+
+@anchor{Release 1_15_0}
+@section Release 1.15.0
+@itemize
+@item
+ Explicitly check if @code{$1} target is touched and then fail.
+ Previously we check if @code{$1} was only altered.
+@end itemize
+
+@anchor{Release 1_14_0}
+@section Release 1.14.0
+@itemize
+@item
+ Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
+@end itemize
+
+@anchor{Release 1_13_0}
+@section Release 1.13.0
+@itemize
+@item
+ Use @file{.log-rec} extension, instead of @file{.log.rec}, that
+ won't collide with already existing @file{.log} and @file{.rec} in
+ @file{.redo} directory.
+@end itemize
+
+@anchor{Release 1_12_0}
+@section Release 1.12.0
+@itemize
+@item
+ Fix possible lack of success finish message printing if any of
+ targets fail.
+@end itemize
+
+@anchor{Release 1_11_0}
+@section Release 1.11.0
+@itemize
+@item
+ Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
+@end itemize
+
+@anchor{Release 1_10_0}
+@section Release 1.10.0
+@itemize
+@item
+ @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
+@item
+ Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
+@end itemize
+
+@anchor{Release 1_9_0}
@section Release 1.9.0
@itemize
@item
- Do not enable command lines options not applicable to the command.
+ Do not enable command line options not applicable to the command.
For example @option{-j} option is only applicable to @command{redo}
and @command{redo-ifchange} commands.
@item
@item @option{-logs} option is renamed to @option{-k}
@item @option{-silent} option is renamed to @option{-s}
@end itemize
+@item
+ When @code{stderr} logs are kept, all environment variables, working
+ directory, command line arguments, start/finish times, duration,
+ participated PIDs, return codes are saved in corresponding
+ @file{.redo/tgt.log.rec} file. Some of them can be viewed with
+ @option{-c} option to @command{redo-log}.
+@item
+ @command{redo-log}'s @option{-r} option allows recursive, indented
+ viewing of the whole redo commands invocations for the given target
+ in serialized way.
@end itemize
-@anchor{Release 1.8.0}
+@anchor{Release 1_8_0}
@section Release 1.8.0
@itemize
@item
is found.
@end itemize
-@anchor{Release 1.7.0}
+@anchor{Release 1_7_0}
@section Release 1.7.0
@itemize
@item
able to tightly integrate @command{goredo} with the @command{make}.
@end itemize
-@anchor{Release 1.6.0}
+@anchor{Release 1_6_0}
@section Release 1.6.0
@itemize
@item
will be affected by changing the specified ones.
@end itemize
-@anchor{Release 1.5.0}
+@anchor{Release 1_5_0}
@section Release 1.5.0
@itemize
@item
files, not the "first" depth level ones.
@end itemize
-@anchor{Release 1.4.1}
+@anchor{Release 1_4_1}
@section Release 1.4.1
@itemize
@item
Even more simpler statusline cleaning function.
@end itemize
-@anchor{Release 1.4.0}
+@anchor{Release 1_4_0}
@section Release 1.4.0
@itemize
@item
Updated dependant libraries.
@end itemize
-@anchor{Release 1.3.0}
+@anchor{Release 1_3_0}
@section Release 1.3.0
@itemize
@item
be OOD targets to redoing targets.
@end itemize
-@anchor{Release 1.2.0}
+@anchor{Release 1_2_0}
@section Release 1.2.0
@itemize
@item
waiting for job slot token.
@end itemize
-@anchor{Release 1.1.0}
+@anchor{Release 1_1_0}
@section Release 1.1.0
@itemize
@item
@command{redo-cleanup} has @option{-dry-run} option.
@end itemize
-@anchor{Release 1.0.0}
+@anchor{Release 1_0_0}
@section Release 1.0.0
@itemize
@item
@command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
@end itemize
-@anchor{Release 0.12.3}
+@anchor{Release 0_12_3}
@section Release 0.12.3
@itemize
@item
arm64 macOS fix.
@end itemize
-@anchor{Release 0.12.2}
+@anchor{Release 0_12_2}
@section Release 0.12.2
@itemize
@item
Fixed tests permissions in the tarball.
@end itemize
-@anchor{Release 0.12.1}
+@anchor{Release 0_12_1}
@section Release 0.12.1
@itemize
@item
1.12+ versions, that have @file{vendor}-ing support.
@end itemize
-@anchor{Release 0.12.0}
+@anchor{Release 0_12_0}
@section Release 0.12.0
@itemize
@item
@option{-debug} option renamed to shorter @option{-d}.
@end itemize
-@anchor{Release 0.11.0}
+@anchor{Release 0_11_0}
@section Release 0.11.0
@itemize
@item
BLAKE2b hashing algorithm for even better performance.
@end itemize
-@anchor{Release 0.10.0}
+@anchor{Release 0_10_0}
@section Release 0.10.0
@itemize
@item Initial tarballed release.