4 @anchor{Release 1_21_0}
5 @section Release 1.21.0
8 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
9 environment variable, that takes either @code{none}, or @code{ctime}
10 (the default one), or @code{mtime} (new one). Check documentation's
11 separate page about that option.
14 @anchor{Release 1_20_0}
15 @section Release 1.20.0
18 Print warning message if both ifcreate and ifchange records were
19 discovered after the target is done.
22 @anchor{Release 1_19_0}
23 @section Release 1.19.0
26 Skip target itself, when searching for corresponding @file{.do}
27 file. For example @file{default.do} must use @file{../default.do}
31 @anchor{Release 1_18_0}
32 @section Release 1.18.0
35 Fix regression of known OODs passing since 1.3.0, that leads to
36 rebuilding of already built targets.
39 @anchor{Release 1_17_0}
40 @section Release 1.17.0
43 If @command{redo*} process is killed, then it sends @code{SIGTERM}
44 to all his children too, properly terminating the whole job queue.
47 @anchor{Release 1_16_0}
48 @section Release 1.16.0
51 Unexistent targets are considered always out-of-date, as it should be.
53 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
56 @anchor{Release 1_15_0}
57 @section Release 1.15.0
60 Explicitly check if @code{$1} target is touched and then fail.
61 Previously we check if @code{$1} was only altered.
64 @anchor{Release 1_14_0}
65 @section Release 1.14.0
68 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
71 @anchor{Release 1_13_0}
72 @section Release 1.13.0
75 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
76 won't collide with already existing @file{.log} and @file{.rec} in
77 @file{.redo} directory.
80 @anchor{Release 1_12_0}
81 @section Release 1.12.0
84 Fix possible lack of success finish message printing if any of
88 @anchor{Release 1_11_0}
89 @section Release 1.11.0
92 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
95 @anchor{Release 1_10_0}
96 @section Release 1.10.0
99 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
101 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
104 @anchor{Release 1_9_0}
105 @section Release 1.9.0
108 Do not enable command line options not applicable to the command.
109 For example @option{-j} option is only applicable to @command{redo}
110 and @command{redo-ifchange} commands.
113 @item @option{-dry-run} option is renamed to @option{-n}
114 @item @option{-logs} option is renamed to @option{-k}
115 @item @option{-silent} option is renamed to @option{-s}
118 When @code{stderr} logs are kept, all environment variables, working
119 directory, command line arguments, start/finish times, duration,
120 participated PIDs, return codes are saved in corresponding
121 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
122 @option{-c} option to @command{redo-log}.
124 @command{redo-log}'s @option{-r} option allows recursive, indented
125 viewing of the whole redo commands invocations for the given target
129 @anchor{Release 1_8_0}
130 @section Release 1.8.0
133 Fixed possibly wrong relative path record of the dependency, when
134 redo commands are run in different directory from the @file{.do}.
136 Fixed possible failing in @command{redo-sources} if no @file{.dep}
140 @anchor{Release 1_7_0}
141 @section Release 1.7.0
144 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
145 with either NetBSD's bmake or GNU Make jobserver protocols, being
146 able to tightly integrate @command{goredo} with the @command{make}.
149 @anchor{Release 1_6_0}
150 @section Release 1.6.0
153 @command{redo-affects} command appeared, that shows all targets that
154 will be affected by changing the specified ones.
157 @anchor{Release 1_5_0}
158 @section Release 1.5.0
161 @command{redo-ood}, @command{redo-sources} and
162 @command{redo-targets} can optionally take list of targets to apply
163 the command on, to narrow the result.
165 @command{redo-sources} mistakenly missed @file{.do} files in the output.
167 @command{redo-sources} now recursively searches for all source
168 files, not the "first" depth level ones.
171 @anchor{Release 1_4_1}
172 @section Release 1.4.1
175 Even more simpler statusline cleaning function.
178 @anchor{Release 1_4_0}
179 @section Release 1.4.0
182 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
183 previously was not applied to all targets.
185 Simpler statusline cleaning function, does not leading to whitespace
186 junk after long lines.
188 Updated dependant libraries.
191 @anchor{Release 1_3_0}
192 @section Release 1.3.0
195 Experimental @command{redo-sources}, @command{redo-targets} and
196 @command{redo-ood} commands.
198 Repetitive OOD determination optimization: pass all already known to
199 be OOD targets to redoing targets.
202 @anchor{Release 1_2_0}
203 @section Release 1.2.0
206 Dependency files @file{.dep} extension changed to @file{.rec}, to
207 reflect its recfile format nature and editors file type better
210 Reduce number of file descriptors kept open (1 instead of 4) while
211 waiting for job slot token.
214 @anchor{Release 1_1_0}
215 @section Release 1.1.0
218 @command{redo-cleanup} has @option{-dry-run} option.
221 @anchor{Release 1_0_0}
222 @section Release 1.0.0
225 @code{Size} is stored in the state, for faster OOD detection.
226 Previous @command{goredo} state files won't work.
228 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
229 trust to file inode's information (except for its size), forcing its
232 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
235 @anchor{Release 0_12_3}
236 @section Release 0.12.3
239 Use an updated @code{lukechampine.com/blake3} with possibly working
243 @anchor{Release 0_12_2}
244 @section Release 0.12.2
247 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
249 Fixed tests permissions in the tarball.
252 @anchor{Release 0_12_1}
253 @section Release 0.12.1
256 Tarball uses @file{vendor} directory without @env{$GOPATH}
257 overriding. @command{goredo} and its dependencies anyway uses Go
258 1.12+ versions, that have @file{vendor}-ing support.
261 @anchor{Release 0_12_0}
262 @section Release 0.12.0
265 Do not forget to save even output-less target as a dependency.
267 @option{-debug} option renamed to shorter @option{-d}.
270 @anchor{Release 0_11_0}
271 @section Release 0.11.0
274 Previously @env{$REDO_JOBS} overrided even explicitly specified
275 @option{-j} option. Fix that behaviour -- command line options must
276 precede environment variables.
277 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
278 BLAKE2b hashing algorithm for even better performance.
281 @anchor{Release 0_10_0}
282 @section Release 0.10.0
284 @item Initial tarballed release.