@node Server
@section Server part
-Except for common @code{-stats}, @code{-egd} options server has the
-following ones:
+Except for common @ref{Stats, -stats}, @ref{EGD, -egd}, @ref{Syslog, -syslog}
+options server has the following ones:
-@table @code
+@table @option
@item -proto
-@ref{Network, network protocol} to use. Can be @emph{udp} (default),
+@ref{Network, Network protocol} to use. Can be @emph{udp} (default),
@emph{tcp} or @emph{all}.
@item -bind
Address (@code{host:port} format) we must bind to.
@item -conf
-Path to JSON file with the configuration.
+Path to YAML file with the configuration.
@item -proxy
Start trivial HTTP @ref{Proxy} server on specified @emph{host:port}.
@end table
-Configuration file is JSON file with following example structure:
+Configuration file is YAML file with following example structure:
@verbatim
-{
- "stargrave": { <-- Peer human readable name
- "iface": "tap10", <-- OPTIONAL TAP interface name
- "mtu": 1514, <-- OPTIONAL overriden MTU
- "up": "./stargrave-up.sh", <-- OPTIONAL up-script
- "down": "./stargrave-down.sh", <-- OPTIONAL down-script
- "timeout": 60, <-- OPTIONAL overriden timeout
- "noise": true, <-- OPTIONAL noise enabler
- (default: false)
- "cpr": 64, <-- OPTIONAL constant packet
- rate in KiB/sec
- "verifier": "$argon2d..." <-- verifier received from client
- },
- [...]
-}
+stargrave: <-- Peer human readable name
+ iface: tap10 <-- OPTIONAL TAP interface name
+ mtu: 1515 <-- OPTIONAL overriden MTU
+ up: ./stargrave-up.sh <-- OPTIONAL up-script
+ down: ./stargrave-down.sh <-- OPTIONAL down-script
+ timeout: 60 <-- OPTIONAL overriden timeout
+ timesync: 0 <-- OPTIONAL time synchronization requirement
+ noise: No <-- OPTIONAL noise enabler
+ cpr: 64 <-- OPTIONAL constant packet rate, KiB/sec
+ encless: No <-- OPTIONAL Encryptionless mode
+ verifier: $baloon... <-- verifier received from client
+[...]
@end verbatim
At least one of either @code{iface} or @code{up} must be specified. If
you specify @code{iface}, then it will be forcefully used to determine
-what TAP interface will be used. If it is not specified, then up-script
-must output interface's name to stdout (first output line).
+what TAP interface will be used. If it is not specified, then
+up-@ref{Scripts, script} must output interface's name to stdout
+(first output line).
For example up-script can be just @code{echo tap10}, or more advanced
like the following one:
-@example
+@verbatim
#!/bin/sh
$tap=$(ifconfig tap create)
ifconfig $tap inet6 fc00::1/96 mtu 1412 up
echo $tap
-@end example
+@end verbatim
Each minute server rereads and refreshes peers configuration and adds
newly appeared identities, deletes an obsolete ones.
-You can use convenient @code{utils/newclient.sh} script for new client
+You can use convenient @command{utils/newclient.sh} script for new client
creation:
@verbatim
% ./utils/newclient.sh Alice
[...]
-Your client verifier is: $argon2d$m=4096,t=128,p=1$bwR5VjeCYIQaa8SeaI3rqg
+Your client verifier is: $balloon$s=32768,t=16,p=2$bwR5VjeCYIQaa8SeaI3rqg
-Place the following JSON configuration entry on the server's side:
+Place the following YAML configuration entry on the server's side:
- "Alice": {
- "up": "/path/to/up.sh",
- "iface": "or TAP interface name",
- "verifier": "$argon2d$m=4096,t=128,p=1$bwR5VjeCYIQaa8SeaI3rqg$KCNIqfS4DGsBTtVytamAzcISgrlEWvNxan1UfBrFu10"
- }
-[...]
+ Alice:
+ up: /path/to/up.sh
+ iface: or TAP interface name
+ verifier: $balloon$s=32768,t=16,p=2$bwR5VjeCYIQaa8SeaI3rqg$KCNIqfS4DGsBTtVytamAzcISgrlEWvNxan1UfBrFu10
+@end verbatim
+
+Example configuration file:
+@verbatim
+stargrave:
+ iface: tap0
+ verifier: $balloon$s=32768,t=16,p=2$VMirzcshcHuG2V4jhUsEjw$X5fC07L8k61h3S1Oro/rC76+m0oGDTA9Bq+aWJ1uOgY
+slow:
+ iface: tap1
+ encless: Yes
+ mtu: 9000
+ cpr: 384
+ verifier: $balloon$s=32768,t=16,p=2$YbIA5garDqCOhtI/2EZVNg$gOo5vcEGynmpeepNscwclicfZsWxzgYFRLbgG21EZ1U
@end verbatim