@item You have got @code{wlan0} NIC with 192.168.0/24 network on it.
@item You want to create virtual encrypted and authenticated 172.16.0/24
network and use it as a default transport.
-@item @code{wlan0} MTU is 1500, 20 bytes overhead per IPv4. So MTU for
-GoVPN is 1500 - 20 - 8 = 1472.
-@item During startup client and server will say that TAP interface MTU
-is 1432.
+@item Assume that outgoing GoVPN packets can be fragmented, so we do not
+bother configuring MTU of TAP interfaces. For better performance just
+lower it and check that no fragmentation of outgoing UDP packets occurs.
@end itemize
@strong{Install}. At first you must @ref{Installation, install} this
server% umask 077
server% ip addr add 192.168.0.1/24 dev wlan0
server% tunctl -t tap10
-server% ip link set mtu 1432 dev tap10
server% ip addr add 172.16.0.1/24 dev tap10
server% ip link set up dev tap10
@end example
@strong{Run server daemon itself}:
@example
-server% govpn-server -bind 192.168.0.1:1194 -mtu 1472
+server% govpn-server -bind 192.168.0.1:1194
@end example
@strong{Prepare network on GNU/Linux IPv4 client}:
client% utils/storekey.sh key.txt
client% ip addr add 192.168.0.2/24 dev wlan0
client% tunctl -t tap10
-client% ip link set mtu 1432 dev tap10
client% ip addr add 172.16.0.2/24 dev tap10
client% ip link set up dev tap10
client% ip route add default via 172.16.0.1
-key key.txt \
-verifier '$argon2d$m=4096,t=128,p=1$bwR5VjeCYIQaa8SeaI3rqg' \
-iface tap10 \
- -remote 192.168.0.1:1194 \
- -mtu 1472
+ -remote 192.168.0.1:1194
@end example
@strong{FreeBSD IPv6 similar client-server example}:
@example
client% ifconfig me0 inet6 -ifdisabled auto_linklocal
client% ifconfig tap10
-client% ifconfig tap10 inet6 fc00::2/96 mtu 1412 up
+client% ifconfig tap10 inet6 fc00::2/96 up
client% route -6 add default fc00::1
client% govpn-client \
-key key.txt \