5 @anchor{Release 1_26_0}
6 @section Release 1.26.0
9 Debug output contained colour-related attribute even if
10 @env{$NO_COLOR=1} was set.
12 Updated dependant libraries.
15 @anchor{Release 1_25_0}
16 @section Release 1.25.0
19 Target's lock file requires a token from the jobserver now. So
20 amount of simultaneously opened lock files depends on job slots
24 @anchor{Release 1_24_0}
25 @section Release 1.24.0
28 @command{redo-cleanup tmp} also removes temporarily (@code{$3})
32 @anchor{Release 1_23_0}
33 @section Release 1.23.0
36 @command{redo-ifchange}'s @option{-f} option forces each target
37 rebuilding. Comparing to @command{redo}, it will parallelize the
40 Inode's number is also stored as dependency information, just to
41 prevent possible @code{ctime} collision of two files.
43 Performance optimization: do not use target's temporary output file
44 at all, if its hash equals to already existing target's one. Just
45 touch existing target file instead.
48 @anchor{Release 1_22_0}
49 @section Release 1.22.0
52 @code{flock} locks replaced with POSIX @code{fcntl} ones.
53 They could be more portable.
55 @command{redo-depfix} command appeared, that traverses through all
56 @file{.redo} directories and their dependency files, checks if
57 corresponding targets has the same content but different
58 @code{ctime}/@code{mtime} values and rewrites dependencies with that
59 updated inode information.
61 With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
62 stop and fail if it meet externally modified file. By default user
63 is only warned about it, but building continues for convenience.
66 @anchor{Release 1_21_0}
67 @section Release 1.21.0
70 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
71 environment variable, that takes either @code{none}, or @code{ctime}
72 (the default one), or @code{mtime} (new one). Check documentation's
73 separate page about that option.
76 @anchor{Release 1_20_0}
77 @section Release 1.20.0
80 Print warning message if both ifcreate and ifchange records were
81 discovered after the target is done.
84 @anchor{Release 1_19_0}
85 @section Release 1.19.0
88 Skip target itself, when searching for corresponding @file{.do}
89 file. For example @file{default.do} must use @file{../default.do}
93 @anchor{Release 1_18_0}
94 @section Release 1.18.0
97 Fix regression of known OODs passing since 1.3.0, that leads to
98 rebuilding of already built targets.
101 @anchor{Release 1_17_0}
102 @section Release 1.17.0
105 If @command{redo*} process is killed, then it sends @code{SIGTERM}
106 to all his children too, properly terminating the whole job queue.
109 @anchor{Release 1_16_0}
110 @section Release 1.16.0
113 Unexistent targets are considered always out-of-date, as it should be.
115 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
118 @anchor{Release 1_15_0}
119 @section Release 1.15.0
122 Explicitly check if @code{$1} target is touched and then fail.
123 Previously we check if @code{$1} was only altered.
126 @anchor{Release 1_14_0}
127 @section Release 1.14.0
130 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
133 @anchor{Release 1_13_0}
134 @section Release 1.13.0
137 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
138 won't collide with already existing @file{.log} and @file{.rec} in
139 @file{.redo} directory.
142 @anchor{Release 1_12_0}
143 @section Release 1.12.0
146 Fix possible lack of success finish message printing if any of
150 @anchor{Release 1_11_0}
151 @section Release 1.11.0
154 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
157 @anchor{Release 1_10_0}
158 @section Release 1.10.0
161 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
163 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
166 @anchor{Release 1_9_0}
167 @section Release 1.9.0
170 Do not enable command line options not applicable to the command.
171 For example @option{-j} option is only applicable to @command{redo}
172 and @command{redo-ifchange} commands.
175 @item @option{-dry-run} option is renamed to @option{-n}
176 @item @option{-logs} option is renamed to @option{-k}
177 @item @option{-silent} option is renamed to @option{-s}
180 When @code{stderr} logs are kept, all environment variables, working
181 directory, command line arguments, start/finish times, duration,
182 participated PIDs, return codes are saved in corresponding
183 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
184 @option{-c} option to @command{redo-log}.
186 @command{redo-log}'s @option{-r} option allows recursive, indented
187 viewing of the whole redo commands invocations for the given target
191 @anchor{Release 1_8_0}
192 @section Release 1.8.0
195 Fixed possibly wrong relative path record of the dependency, when
196 redo commands are run in different directory from the @file{.do}.
198 Fixed possible failing in @command{redo-sources} if no @file{.dep}
202 @anchor{Release 1_7_0}
203 @section Release 1.7.0
206 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
207 with either NetBSD's bmake or GNU Make jobserver protocols, being
208 able to tightly integrate @command{goredo} with the @command{make}.
211 @anchor{Release 1_6_0}
212 @section Release 1.6.0
215 @command{redo-affects} command appeared, that shows all targets that
216 will be affected by changing the specified ones.
219 @anchor{Release 1_5_0}
220 @section Release 1.5.0
223 @command{redo-ood}, @command{redo-sources} and
224 @command{redo-targets} can optionally take list of targets to apply
225 the command on, to narrow the result.
227 @command{redo-sources} mistakenly missed @file{.do} files in the output.
229 @command{redo-sources} now recursively searches for all source
230 files, not the "first" depth level ones.
233 @anchor{Release 1_4_1}
234 @section Release 1.4.1
237 Even more simpler statusline cleaning function.
240 @anchor{Release 1_4_0}
241 @section Release 1.4.0
244 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
245 previously was not applied to all targets.
247 Simpler statusline cleaning function, does not leading to whitespace
248 junk after long lines.
250 Updated dependant libraries.
253 @anchor{Release 1_3_0}
254 @section Release 1.3.0
257 Experimental @command{redo-sources}, @command{redo-targets} and
258 @command{redo-ood} commands.
260 Repetitive OOD determination optimization: pass all already known to
261 be OOD targets to redoing targets.
264 @anchor{Release 1_2_0}
265 @section Release 1.2.0
268 Dependency files @file{.dep} extension changed to @file{.rec}, to
269 reflect its recfile format nature and editors file type better
272 Reduce number of file descriptors kept open (1 instead of 4) while
273 waiting for job slot token.
276 @anchor{Release 1_1_0}
277 @section Release 1.1.0
280 @command{redo-cleanup} has @option{-dry-run} option.
283 @anchor{Release 1_0_0}
284 @section Release 1.0.0
287 @code{Size} is stored in the state, for faster OOD detection.
288 Previous @command{goredo} state files won't work.
290 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
291 trust to file inode's information (except for its size), forcing its
294 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
297 @anchor{Release 0_12_3}
298 @section Release 0.12.3
301 Use an updated @code{lukechampine.com/blake3} with possibly working
305 @anchor{Release 0_12_2}
306 @section Release 0.12.2
309 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
311 Fixed tests permissions in the tarball.
314 @anchor{Release 0_12_1}
315 @section Release 0.12.1
318 Tarball uses @file{vendor} directory without @env{$GOPATH}
319 overriding. @command{goredo} and its dependencies anyway uses Go
320 1.12+ versions, that have @file{vendor}-ing support.
323 @anchor{Release 0_12_0}
324 @section Release 0.12.0
327 Do not forget to save even output-less target as a dependency.
329 @option{-debug} option renamed to shorter @option{-d}.
332 @anchor{Release 0_11_0}
333 @section Release 0.11.0
336 Previously @env{$REDO_JOBS} overrided even explicitly specified
337 @option{-j} option. Fix that behaviour -- command line options must
338 precede environment variables.
339 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
340 BLAKE2b hashing algorithm for even better performance.
343 @anchor{Release 0_10_0}
344 @section Release 0.10.0
346 @item Initial tarballed release.