5 @anchor{Release 1_23_0}
6 @section Release 1.23.0
9 @command{redo-ifchange}'s @option{-f} option forces each target
10 rebuilding. Comparing to @command{redo}, it will parallelize the
14 @anchor{Release 1_22_0}
15 @section Release 1.22.0
18 @code{flock} locks replaced with POSIX @code{fcntl} ones.
19 They could be more portable.
21 @command{redo-depfix} command appeared, that traverses through all
22 @file{.redo} directories and their dependency files, checks if
23 corresponding targets has the same content but different
24 @code{ctime}/@code{mtime} values and rewrites dependencies with that
25 updated inode information.
27 With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
28 stop and fail if it meet externally modified file. By default user
29 is only warned about it, but building continues for convenience.
32 @anchor{Release 1_21_0}
33 @section Release 1.21.0
36 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
37 environment variable, that takes either @code{none}, or @code{ctime}
38 (the default one), or @code{mtime} (new one). Check documentation's
39 separate page about that option.
42 @anchor{Release 1_20_0}
43 @section Release 1.20.0
46 Print warning message if both ifcreate and ifchange records were
47 discovered after the target is done.
50 @anchor{Release 1_19_0}
51 @section Release 1.19.0
54 Skip target itself, when searching for corresponding @file{.do}
55 file. For example @file{default.do} must use @file{../default.do}
59 @anchor{Release 1_18_0}
60 @section Release 1.18.0
63 Fix regression of known OODs passing since 1.3.0, that leads to
64 rebuilding of already built targets.
67 @anchor{Release 1_17_0}
68 @section Release 1.17.0
71 If @command{redo*} process is killed, then it sends @code{SIGTERM}
72 to all his children too, properly terminating the whole job queue.
75 @anchor{Release 1_16_0}
76 @section Release 1.16.0
79 Unexistent targets are considered always out-of-date, as it should be.
81 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
84 @anchor{Release 1_15_0}
85 @section Release 1.15.0
88 Explicitly check if @code{$1} target is touched and then fail.
89 Previously we check if @code{$1} was only altered.
92 @anchor{Release 1_14_0}
93 @section Release 1.14.0
96 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
99 @anchor{Release 1_13_0}
100 @section Release 1.13.0
103 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
104 won't collide with already existing @file{.log} and @file{.rec} in
105 @file{.redo} directory.
108 @anchor{Release 1_12_0}
109 @section Release 1.12.0
112 Fix possible lack of success finish message printing if any of
116 @anchor{Release 1_11_0}
117 @section Release 1.11.0
120 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
123 @anchor{Release 1_10_0}
124 @section Release 1.10.0
127 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
129 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
132 @anchor{Release 1_9_0}
133 @section Release 1.9.0
136 Do not enable command line options not applicable to the command.
137 For example @option{-j} option is only applicable to @command{redo}
138 and @command{redo-ifchange} commands.
141 @item @option{-dry-run} option is renamed to @option{-n}
142 @item @option{-logs} option is renamed to @option{-k}
143 @item @option{-silent} option is renamed to @option{-s}
146 When @code{stderr} logs are kept, all environment variables, working
147 directory, command line arguments, start/finish times, duration,
148 participated PIDs, return codes are saved in corresponding
149 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
150 @option{-c} option to @command{redo-log}.
152 @command{redo-log}'s @option{-r} option allows recursive, indented
153 viewing of the whole redo commands invocations for the given target
157 @anchor{Release 1_8_0}
158 @section Release 1.8.0
161 Fixed possibly wrong relative path record of the dependency, when
162 redo commands are run in different directory from the @file{.do}.
164 Fixed possible failing in @command{redo-sources} if no @file{.dep}
168 @anchor{Release 1_7_0}
169 @section Release 1.7.0
172 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
173 with either NetBSD's bmake or GNU Make jobserver protocols, being
174 able to tightly integrate @command{goredo} with the @command{make}.
177 @anchor{Release 1_6_0}
178 @section Release 1.6.0
181 @command{redo-affects} command appeared, that shows all targets that
182 will be affected by changing the specified ones.
185 @anchor{Release 1_5_0}
186 @section Release 1.5.0
189 @command{redo-ood}, @command{redo-sources} and
190 @command{redo-targets} can optionally take list of targets to apply
191 the command on, to narrow the result.
193 @command{redo-sources} mistakenly missed @file{.do} files in the output.
195 @command{redo-sources} now recursively searches for all source
196 files, not the "first" depth level ones.
199 @anchor{Release 1_4_1}
200 @section Release 1.4.1
203 Even more simpler statusline cleaning function.
206 @anchor{Release 1_4_0}
207 @section Release 1.4.0
210 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
211 previously was not applied to all targets.
213 Simpler statusline cleaning function, does not leading to whitespace
214 junk after long lines.
216 Updated dependant libraries.
219 @anchor{Release 1_3_0}
220 @section Release 1.3.0
223 Experimental @command{redo-sources}, @command{redo-targets} and
224 @command{redo-ood} commands.
226 Repetitive OOD determination optimization: pass all already known to
227 be OOD targets to redoing targets.
230 @anchor{Release 1_2_0}
231 @section Release 1.2.0
234 Dependency files @file{.dep} extension changed to @file{.rec}, to
235 reflect its recfile format nature and editors file type better
238 Reduce number of file descriptors kept open (1 instead of 4) while
239 waiting for job slot token.
242 @anchor{Release 1_1_0}
243 @section Release 1.1.0
246 @command{redo-cleanup} has @option{-dry-run} option.
249 @anchor{Release 1_0_0}
250 @section Release 1.0.0
253 @code{Size} is stored in the state, for faster OOD detection.
254 Previous @command{goredo} state files won't work.
256 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
257 trust to file inode's information (except for its size), forcing its
260 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
263 @anchor{Release 0_12_3}
264 @section Release 0.12.3
267 Use an updated @code{lukechampine.com/blake3} with possibly working
271 @anchor{Release 0_12_2}
272 @section Release 0.12.2
275 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
277 Fixed tests permissions in the tarball.
280 @anchor{Release 0_12_1}
281 @section Release 0.12.1
284 Tarball uses @file{vendor} directory without @env{$GOPATH}
285 overriding. @command{goredo} and its dependencies anyway uses Go
286 1.12+ versions, that have @file{vendor}-ing support.
289 @anchor{Release 0_12_0}
290 @section Release 0.12.0
293 Do not forget to save even output-less target as a dependency.
295 @option{-debug} option renamed to shorter @option{-d}.
298 @anchor{Release 0_11_0}
299 @section Release 0.11.0
302 Previously @env{$REDO_JOBS} overrided even explicitly specified
303 @option{-j} option. Fix that behaviour -- command line options must
304 precede environment variables.
305 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
306 BLAKE2b hashing algorithm for even better performance.
309 @anchor{Release 0_10_0}
310 @section Release 0.10.0
312 @item Initial tarballed release.