5 @anchor{Release 1_26_0}
6 @section Release 1.26.0
9 Debug output contained colour-related attribute even if
10 @env{$NO_COLOR=1} was set.
13 @anchor{Release 1_25_0}
14 @section Release 1.25.0
17 Target's lock file requires a token from the jobserver now. So
18 amount of simultaneously opened lock files depends on job slots
22 @anchor{Release 1_24_0}
23 @section Release 1.24.0
26 @command{redo-cleanup tmp} also removes temporarily (@code{$3})
30 @anchor{Release 1_23_0}
31 @section Release 1.23.0
34 @command{redo-ifchange}'s @option{-f} option forces each target
35 rebuilding. Comparing to @command{redo}, it will parallelize the
38 Inode's number is also stored as dependency information, just to
39 prevent possible @code{ctime} collision of two files.
41 Performance optimization: do not use target's temporary output file
42 at all, if its hash equals to already existing target's one. Just
43 touch existing target file instead.
46 @anchor{Release 1_22_0}
47 @section Release 1.22.0
50 @code{flock} locks replaced with POSIX @code{fcntl} ones.
51 They could be more portable.
53 @command{redo-depfix} command appeared, that traverses through all
54 @file{.redo} directories and their dependency files, checks if
55 corresponding targets has the same content but different
56 @code{ctime}/@code{mtime} values and rewrites dependencies with that
57 updated inode information.
59 With @env{$REDO_STOP_IF_MODIFIED=1} environment variable redo will
60 stop and fail if it meet externally modified file. By default user
61 is only warned about it, but building continues for convenience.
64 @anchor{Release 1_21_0}
65 @section Release 1.21.0
68 @env{$REDO_INODE_NO_TRUST} is replaced with @env{$REDO_INODE_TRUST}
69 environment variable, that takes either @code{none}, or @code{ctime}
70 (the default one), or @code{mtime} (new one). Check documentation's
71 separate page about that option.
74 @anchor{Release 1_20_0}
75 @section Release 1.20.0
78 Print warning message if both ifcreate and ifchange records were
79 discovered after the target is done.
82 @anchor{Release 1_19_0}
83 @section Release 1.19.0
86 Skip target itself, when searching for corresponding @file{.do}
87 file. For example @file{default.do} must use @file{../default.do}
91 @anchor{Release 1_18_0}
92 @section Release 1.18.0
95 Fix regression of known OODs passing since 1.3.0, that leads to
96 rebuilding of already built targets.
99 @anchor{Release 1_17_0}
100 @section Release 1.17.0
103 If @command{redo*} process is killed, then it sends @code{SIGTERM}
104 to all his children too, properly terminating the whole job queue.
107 @anchor{Release 1_16_0}
108 @section Release 1.16.0
111 Unexistent targets are considered always out-of-date, as it should be.
113 Do not panic if @env{$REDO_LOGS=1} and we were unable to start the command.
116 @anchor{Release 1_15_0}
117 @section Release 1.15.0
120 Explicitly check if @code{$1} target is touched and then fail.
121 Previously we check if @code{$1} was only altered.
124 @anchor{Release 1_14_0}
125 @section Release 1.14.0
128 Fixed @command{redo-ifcreate}'s targets proper relative paths to the target.
131 @anchor{Release 1_13_0}
132 @section Release 1.13.0
135 Use @file{.log-rec} extension, instead of @file{.log.rec}, that
136 won't collide with already existing @file{.log} and @file{.rec} in
137 @file{.redo} directory.
140 @anchor{Release 1_12_0}
141 @section Release 1.12.0
144 Fix possible lack of success finish message printing if any of
148 @anchor{Release 1_11_0}
149 @section Release 1.11.0
152 Fix nasty bug with incorrect @file{.redo/tgt.rec} files renaming.
155 @anchor{Release 1_10_0}
156 @section Release 1.10.0
159 @command{redo-cleanup} now also cleans @file{.redo/tgt.log.rec} files.
161 Recursive logs do not require @file{.redo/tgt.rec} existence anymore.
164 @anchor{Release 1_9_0}
165 @section Release 1.9.0
168 Do not enable command line options not applicable to the command.
169 For example @option{-j} option is only applicable to @command{redo}
170 and @command{redo-ifchange} commands.
173 @item @option{-dry-run} option is renamed to @option{-n}
174 @item @option{-logs} option is renamed to @option{-k}
175 @item @option{-silent} option is renamed to @option{-s}
178 When @code{stderr} logs are kept, all environment variables, working
179 directory, command line arguments, start/finish times, duration,
180 participated PIDs, return codes are saved in corresponding
181 @file{.redo/tgt.log.rec} file. Some of them can be viewed with
182 @option{-c} option to @command{redo-log}.
184 @command{redo-log}'s @option{-r} option allows recursive, indented
185 viewing of the whole redo commands invocations for the given target
189 @anchor{Release 1_8_0}
190 @section Release 1.8.0
193 Fixed possibly wrong relative path record of the dependency, when
194 redo commands are run in different directory from the @file{.do}.
196 Fixed possible failing in @command{redo-sources} if no @file{.dep}
200 @anchor{Release 1_7_0}
201 @section Release 1.7.0
204 Optional compatibility (through @env{$REDO_MAKE=@{bmake|gmake@}})
205 with either NetBSD's bmake or GNU Make jobserver protocols, being
206 able to tightly integrate @command{goredo} with the @command{make}.
209 @anchor{Release 1_6_0}
210 @section Release 1.6.0
213 @command{redo-affects} command appeared, that shows all targets that
214 will be affected by changing the specified ones.
217 @anchor{Release 1_5_0}
218 @section Release 1.5.0
221 @command{redo-ood}, @command{redo-sources} and
222 @command{redo-targets} can optionally take list of targets to apply
223 the command on, to narrow the result.
225 @command{redo-sources} mistakenly missed @file{.do} files in the output.
227 @command{redo-sources} now recursively searches for all source
228 files, not the "first" depth level ones.
231 @anchor{Release 1_4_1}
232 @section Release 1.4.1
235 Even more simpler statusline cleaning function.
238 @anchor{Release 1_4_0}
239 @section Release 1.4.0
242 Fixed proper @option{-xx} and @env{$REDO_TRACE} workability, that
243 previously was not applied to all targets.
245 Simpler statusline cleaning function, does not leading to whitespace
246 junk after long lines.
248 Updated dependant libraries.
251 @anchor{Release 1_3_0}
252 @section Release 1.3.0
255 Experimental @command{redo-sources}, @command{redo-targets} and
256 @command{redo-ood} commands.
258 Repetitive OOD determination optimization: pass all already known to
259 be OOD targets to redoing targets.
262 @anchor{Release 1_2_0}
263 @section Release 1.2.0
266 Dependency files @file{.dep} extension changed to @file{.rec}, to
267 reflect its recfile format nature and editors file type better
270 Reduce number of file descriptors kept open (1 instead of 4) while
271 waiting for job slot token.
274 @anchor{Release 1_1_0}
275 @section Release 1.1.0
278 @command{redo-cleanup} has @option{-dry-run} option.
281 @anchor{Release 1_0_0}
282 @section Release 1.0.0
285 @code{Size} is stored in the state, for faster OOD detection.
286 Previous @command{goredo} state files won't work.
288 Setting of @env{$REDO_INODE_NO_TRUST} environment variable brings no
289 trust to file inode's information (except for its size), forcing its
292 @command{redo-whichdo} resembles @code{apenwarr/redo}'s one behaviour more.
295 @anchor{Release 0_12_3}
296 @section Release 0.12.3
299 Use an updated @code{lukechampine.com/blake3} with possibly working
303 @anchor{Release 0_12_2}
304 @section Release 0.12.2
307 Try to fix failing @code{lukechampine.com/blake3} on arm64 macOS.
309 Fixed tests permissions in the tarball.
312 @anchor{Release 0_12_1}
313 @section Release 0.12.1
316 Tarball uses @file{vendor} directory without @env{$GOPATH}
317 overriding. @command{goredo} and its dependencies anyway uses Go
318 1.12+ versions, that have @file{vendor}-ing support.
321 @anchor{Release 0_12_0}
322 @section Release 0.12.0
325 Do not forget to save even output-less target as a dependency.
327 @option{-debug} option renamed to shorter @option{-d}.
330 @anchor{Release 0_11_0}
331 @section Release 0.11.0
334 Previously @env{$REDO_JOBS} overrided even explicitly specified
335 @option{-j} option. Fix that behaviour -- command line options must
336 precede environment variables.
337 @item @url{https://github.com/BLAKE3-team/BLAKE3, BLAKE3} replaces
338 BLAKE2b hashing algorithm for even better performance.
341 @anchor{Release 0_10_0}
342 @section Release 0.10.0
344 @item Initial tarballed release.