@node News
+@cindex news
@unnumbered News
See also this page @ref{Новости, on russian}.
-@node Release 3.3
+@node Release 8_7_0
+@section Release 8.7.0
+@itemize
+
+@item
+@command{nncp-ack} previously did not remove corresponding @file{hdr/} files.
+
+@end itemize
+
+@node Release 8_6_0
+@section Release 8.6.0
+@itemize
+
+@item
+@command{nncp-xfer} checks if locally copied packet's checksum differs
+from the source's one.
+
+@item
+@command{nncp-call} has bad return code if its queues contain unfinished jobs.
+
+@item
+@command{nncp-ack} command appeared, that sends explicit packet receipt
+acknowledgement (ACK packet). That acknowledgement deletes referenced
+packet from the outbound spool.
+
+@item
+Ability to turn @code{fsync} operation off using @env{$NNCPNOSYNC=1}
+environment variable.
+
+@item
+Added various indices in documentation, that should help searching in it.
+
+@end itemize
+
+@node Release 8_5_0
+@section Release 8.5.0
+@itemize
+
+@item
+Fixed @command{nncp-bundle} workability.
+
+@item
+Mistakenly @option{-mcd-wait} option was enabled by default in
+@command{nncp-call}.
+
+@item
+Ability to override internal default timeout for online protocol through
+@env{$NNCPDEADLINE} environment variable. Can be useful for very high
+delay links.
+
+@item
+NNCP builds on OpenBSD.
+
+@end itemize
+
+@node Release 8_4_0
+@section Release 8.4.0
+@itemize
+
+@item
+Multicast related interface names (@code{mcd-listen} and @code{mcd-send}
+configuration options) are now regular expressions. By default
+@command{nncp-cfgnew} uncomments them now with @code{.*} interface name.
+
+@item
+@command{nncp-call} command has @option{-mcd-wait} option to wait for
+multicast packet about node's address.
+
+@item
+@command{nncp-file} command skips everything that is neither regular
+file nor directory during pax-archive creation.
+
+@end itemize
+
+@node Release 8_3_0
+@section Release 8.3.0
+@itemize
+
+@item
+Fixed building issues on 32-bit systems.
+
+@end itemize
+
+@node Release 8_2_0
+@section Release 8.2.0
+@itemize
+
+@item
+Yggdrasil uses pure-Go IPv6+TCP network stack, instead of naked μTP
+transport protocol, making it able to work as an ordinary TCP server
+inside overlay network.
+
+@item
+Yggdrasil's @code{prv;bind1,bind2;pub@dots{}}-like configuration strings are
+replaced with URL-like ones (@code{yggdrasils://PRV?bind=BIND1&bind=BIND2&pub=PUB}).
+
+@item
+Ability to pass multicast-related parameters to Yggdrasil configuration.
+
+@item
+@command{nncp-daemon} is able to listen on both TCP and Yggdrasil-driven
+sockets simultaneously.
+
+@item
+@command{nncp-daemon}'s listening on peering endpoint socket is optional
+-- you can be reached through the peers.
+
+@end itemize
+
+@node Release 8_1_0
+@section Release 8.1.0
+@itemize
+
+@item
+@command{nncp-cfgdir} does not require @code{self} section existence in
+configuration file.
+
+@item
+Ability to act as Yggdrasil network client, using online protocol on top of it.
+
+@end itemize
+
+@node Release 8_0_2
+@section Release 8.0.2
+@itemize
+
+@item
+Fixed sending ability to areas.
+
+@end itemize
+
+@node Release 8_0_1
+@section Release 8.0.1
+@itemize
+
+@item
+Fixed incorrect @code{freq.chunked} value calculation. If it was missed,
+then chunked transfer mode was forcefully turned on anyway.
+
+@item
+Fixed incorrect full file's size calculation in @file{.nncp.meta}.
+
+@end itemize
+
+@node Release 8_0_0
+@section Release 8.0.0
+@itemize
+
+@item
+@strong{Incompatible} encrypted packet format change: payload and pad
+sizes are sent in-bound in the encrypted stream. That gives ability to
+streamingly create encrypted packets, without knowing sizes in advance,
+without creating temporary file or buffer data in memory.
+
+@item
+Proper encrypted packet padding verification is done now. This is not
+critical issue, but previously neither padding value, nor its size were
+authenticated, giving ability to iteratively strip trailing bytes and
+determine payload's size by observing the reaction of the encrypted
+packet processing.
+
+@item
+@command{nncp-exec} loses its @option{-use-tmp} option, because of
+streaming-compatible encrypted packets format.
+
+@item
+@command{nncp-file} and @command{nncp-exec} commands have
+@option{-maxsize} option, limiting maximal resulting encrypted packet's
+maximal size (returning error if it is exceeded). Could be useful,
+because no payload size could be known in advance.
+
+@end itemize
+
+@node Release 7_7_0
+@section Release 7.7.0
+@itemize
+
+@item
+Experimental @code{kqueue} and @code{inotify} based notifications
+support about spool directory changes, for reducing their often reading
+overhead.
+
+@item
+@file{.seen} and @file{.hdr} files moved to @file{seen/} and @file{hdr/}
+subdirectories, for faster scanning of spool directories.
+Current files migration required:
+
+@example
+$ find $NNCPSPOOL -type f -name "*.hdr" -exec rm @{@} +
+
+$ find $NNCPSPOOL -type d -name rx | while read rx ; do
+ cd $rx
+ mkdir -p seen
+ find . -type f -name "*.seen" | while read fn ; do
+ mv $fn seen/$@{fn%.seen@}
+ done
+done
+
+$ find $NNCPSPOOL -type d -name area | while read area ; do
+ find $area -type f -name "*.seen" | while read fn ; do
+ mv $fn $@{fn%.seen@}
+ done
+done
+@end example
+
+@end itemize
+
+@node Release 7_6_0
+@section Release 7.6.0
+@itemize
+
+@item
+Logging may be done to specified opened file descriptor
+(@env{$NNCPLOG=FD:5} for example).
+That is friendly to use under @command{daemontools}.
+
+@item
+Added additional checks of public keys existence in configuration file,
+preventing some commands from failing.
+
+@end itemize
+
+@node Release 7_5_1
+@section Release 7.5.1
+@itemize
+
+@item
+NNCP builds on NetBSD.
+
+@end itemize
+
+@node Release 7_5_0
+@section Release 7.5.0
+@itemize
+
+@item
+@command{nncp-daemon} is compatible with UCSPI-TCP interface, so log
+will contain remote side's address (when running under appropriate
+utility). @option{-ucspi} option should be used instead of @option{-inetd}.
+
+@item
+@command{nncp-call} can be UCSPI-TCP client, using @option{-ucspi} option.
+
+@item
+Do not exit if some of MCD network interfaces can not be listened --
+only warn about that.
+
+@end itemize
+
+@node Release 7_4_0
+@section Release 7.4.0
+@itemize
+
+@item
+Fixed simultaneous @command{nncp-daemon} and @command{nncp-caller} MCD work.
+
+@end itemize
+
+@node Release 7_3_2
+@section Release 7.3.2
+@itemize
+
+@item
+@command{hjson-cli} utility builds in vendor-mode now.
+
+@end itemize
+
+@node Release 7_3_1
+@section Release 7.3.1
+@itemize
+
+@item
+Fixed possibly left opened file descriptor in online commands.
+
+@item
+Severely decreased memory usage of MTH hashing.
+
+@end itemize
+
+@node Release 7_3_0
+@section Release 7.3.0
+@itemize
+
+@item
+Fixed some workability problems on 32-bit systems with big files.
+
+@item
+Ability to use directory with a bunch of files as a configuration.
+@command{nncp-cfgdir} command appeared.
+
+@end itemize
+
+@node Release 7_2_1
+@section Release 7.2.1
+@itemize
+
+@item
+Small optimizations in online commands.
+
+@end itemize
+
+@node Release 7_2_0
+@section Release 7.2.0
+@itemize
+
+@item
+@command{nncp-trns} command appeared for manual transition packets creation.
+
+@item
+If destination node of transitional packet has non empty @option{via}
+route, then do not ignore, but use it.
+
+@item
+Do not relay multicast packet to area message's originator, that
+obviously has seen its own packet.
+
+@item
+Much less memory usage during MTH hashing when offset is zero: when
+packet is not resumed, but for example checked with @command{nncp-check}
+command.
+
+@end itemize
+
+@node Release 7_1_1
+@section Release 7.1.1
+@itemize
+
+@item
+Fixed failing directories @code{fsync} after @file{.seen} file creation.
+
+@end itemize
+
+@node Release 7_1_0
+@section Release 7.1.0
+@itemize
+
+@item
+Multicasting areas feature appeared. Implemented merely by an additional
+plain packet type with @command{nncp-toss}, @command{nncp-file} and
+@command{nncp-exec} commands modification.
+
+@item
+Fixed workability of @command{nncp-file} and @command{nncp-exec}
+commands, that use temporary file (@code{stdin} and @option{-use-tmp}).
+
+@item
+Fixed disappearing bad return code in @command{nncp-exec} command.
+
+@item
+Fixed invalid @file{.hdr} generation when transitional packets are used.
+
+@item
+@option{-all} option appeared in @command{nncp-rm} command, applying to
+all the nodes at once.
+
+@item
+@option{-cycle} option appeared in @command{nncp-check} command, looping
+the check in infinite cycle.
+
+@item
+@command{nncp-rm} command can take node alias name.
+
+@item
+@command{nncp-pkt} can parse @file{.hdr} files.
+
+@end itemize
+
+@node Release 7_0_0
+@section Release 7.0.0
+@itemize
+
+@item
+Minimal required Go version 1.13.
+
+@item
+Merkle Tree-based Hashing with BLAKE3 (MTH) is used instead of BLAKE2b.
+Because of that, there are backward @strong{incompatible} changes of
+encrypted files (everything laying in the spool directory) and
+@file{.meta} files of chunked transfer.
+
+Current implementation is far from being optimal: it lacks
+parallelizable calculations and has higher memory consumption: nearly
+512 KiB for each 1 GiB of file's data. Future performance and memory
+size optimizations should not lead to packet's format change. But it is
+still several times faster than BLAKE2b.
+
+@item
+Resumed online downloads, because of MTH, require reading only of the
+preceding part of file, not the whole one as was before.
+
+@item
+@command{nncp-hash} utility appeared for calculating file's MTH hash.
+
+@item
+BLAKE2 KDF and XOF functions are replaced with BLAKE3 in encrypted
+packets. Lowering number of used primitives. Also, its encrypted
+packet's header is used as an associated data during encryption.
+
+@item
+MultiCast Discovery uses
+@verb{|ff02::4e4e:4350|} address instead of @verb{|ff02::1|}.
+
+@item
+@command{nncp-cfgenc} mistakenly asked passphrase three times during encryption.
+
+@item
+@command{nncp-stat} reports about partly downloaded packets.
+
+@item
+Updated dependencies.
+
+@end itemize
+
+@node Release 6_6_0
+@section Release 6.6.0
+@itemize
+
+@item
+@command{nncp-daemon}, @command{nncp-call} and @command{nncp-caller}
+commands wait for all background checksummers completion after
+connection is finished.
+
+@item
+Added possibility of address determining through multicast announcement
+in local area network, so called MCD (MultiCast Discovery).
+
+@end itemize
+
+@node Release 6_5_0
+@section Release 6.5.0
+@itemize
+
+@item
+Fixed segfault in @command{nncp-daemon} when SP handshake did not succeed.
+
+@item
+Fixed possible bad return code ignoring in automatic tosser.
+
+@item
+Fixed race during file descriptors closing when online protocol call is
+finished, that could lead to write error of received packet fragment.
+
+@item
+Kill all packet transmission progress bars in @command{nncp-daemon},
+@command{nncp-call} and @command{nncp-caller} when call is finished.
+
+@end itemize
+
+@node Release 6_4_0
+@section Release 6.4.0
+@itemize
+
+@item
+Fixed possible race in online protocol, that lead to panic.
+
+@end itemize
+
+@node Release 6_3_0
+@section Release 6.3.0
+@itemize
+
+@item
+Fixed possible panic while showing progress during online protocol.
+
+@end itemize
+
+@node Release 6_2_1
+@section Release 6.2.1
+@itemize
+
+@item
+Three places in logs contained excess @code{%s}.
+
+@end itemize
+
+@node Release 6_2_0
+@section Release 6.2.0
+@itemize
+
+@item
+Returned @command{nncp-caller}'s @option{-autotoss*} options workability.
+
+@item
+Yet another logging refactoring and simplification.
+Should be no visible differences to the end user.
+
+@end itemize
+
+@node Release 6_1_0
+@section Release 6.1.0
+@itemize
+
+@item
+Optimization: most commands do not keep opened file descriptors now.
+Previously you can exceed maximal number of opened files if you have got
+many packets in the spool directory.
+
+@item
+Optimization: do not close file descriptor of the file we download
+online. Previously each chunk lead to expensive open/close calls.
+
+@item
+Online downloaded files are saved with @file{.nock} (non-checksummed)
+suffix, waiting either for @command{nncp-check}, or online daemons to
+perform integrity check.
+
+@item
+Optimization: files, that are not resumed, are checksummed immediately
+during the online download, skipping @file{.nock}-intermediate step.
+
+@item
+Ability to store encrypted packet's header in @file{.hdr} file, close to
+the packet itself. That can greatly increase performance of packets
+listing on filesystems with big block's size.
+
+@end itemize
+
+@node Release 6_0_0
+@section Release 6.0.0
+@itemize
+
+@item
+Log uses human readable and easy machine parseable
+@url{https://www.gnu.org/software/recutils/, recfile} format for the
+records, instead of structured RFC 3339 lines. Old logs are not readable
+by @command{nncp-log} anymore.
+
+@item
+@option{-autotoss*} option workability with @command{nncp-daemon}'s
+@option{-inetd} mode.
+
+@item
+Call's @option{when-tx-exists} allows to make a call only when outbound
+packets exists. Combined with seconds-aware cron expression that can be
+used as some kind of auto dialler.
+
+@item
+@command{nncp-cronexpr} command allows you to check validity and
+expectations of specified cron expression.
+
+@end itemize
+
+@node Release 5_6_0
+@section Release 5.6.0
+@itemize
+
+@item
+@option{-autotoss*} option runs tosser not after the call, but every
+second while it is active.
+
+@item
+@option{autotoss}, @option{autotoss-doseen},
+@option{autotoss-nofile}, @option{autotoss-nofreq},
+@option{autotoss-noexec}, @option{autotoss-notrns} options available in
+@option{calls} configuration section. You can configure per-call
+automatic tosser options.
+
+@item
+Use vendoring, instead of @env{$GOPATH} overriding during tarball
+installation, because current minimal Go's version is 1.12 and it
+supports modules.
+
+@end itemize
+
+@node Release 5_5_1
+@section Release 5.5.1
+@itemize
+
+@item
+Respect for @env{$BINDIR}, @env{$INFODIR} and @env{$DOCDIR} environment
+variables in @file{config} during installation.
+
+@end itemize
+
+@node Release 5_5_0
+@section Release 5.5.0
+@itemize
+
+@item
+Bugfixes in @command{nncp-call(er)}/@command{nncp-daemon},
+@command{nncp-bundle} and @command{nncp-stat}.
+
+@item
+@command{nncp-rm} has @option{-dryrun} and @option{-older} options now.
+
+@item
+@command{nncp-exec} has @option{-use-tmp} and @option{-nocompress}
+options now. Uncompressed packets are not compatible with previous NNCP
+versions.
+
+@item
+@command{nncp-call}, @command{nncp-caller} and @command{nncp-daemon} commands
+have @option{-autotoss*} options for running tosser after call is ended.
+
+@item
+Updated dependencies. Minimal required Go version is 1.12.
+
+@end itemize
+
+@node Release 5_4_1
+@section Release 5.4.1
+@itemize
+
+@item
+Fixed @code{SENDMAIL} variable usage during the build.
+
+@end itemize
+
+@node Release 5_4_0
+@section Release 5.4.0
+@itemize
+
+@item
+Updated dependencies.
+
+@item
+Build system is moved from Makefiles to @url{http://cr.yp.to/redo.html, redo}.
+This should not influence package maintainers, because minimal @command{redo}
+implementation is included in tarball.
+
+@end itemize
+
+@node Release 5_3_3
+@section Release 5.3.3
+@itemize
+
+@item
+More various error checks.
+
+@item
+Updated dependencies.
+
+@end itemize
+
+@node Release 5_3_2
+@section Release 5.3.2
+@itemize
+
+@item
+Fixed incorrect logic of @option{onlinedeadline} timeout, where
+connection won't take into account incoming packets events and will
+forcefully disconnect.
+
+@end itemize
+
+@node Release 5_3_1
+@section Release 5.3.1
+@itemize
+
+@item
+Fixed @option{onlinedeadline} workability with call addresses that use
+external commands (@verb{#"|somecmd"#}).
+
+@item
+@command{nncp-stat} has @option{-pkt} option displaying information
+about each packet in the spool.
+
+@end itemize
+
+@node Release 5_3_0
+@section Release 5.3.0
+@itemize
+
+@item
+Progress messages contain prefix, describing the running action.
+
+@item
+Fixed not occurring handshake messages padding.
+
+@item
+Finish all SP protocol related goroutines, less memory leak.
+
+@item
+SP protocol generates less socket write calls, thus generating less TCP
+packets.
+
+@item
+Check @option{onlinedeadline} and @option{maxonlinetime} options every
+second, independently from socket reads (up to 10 seconds).
+
+@item
+Once per minute, if no other traffic exists, PING packets are sent in
+SP-connection. That allows faster determining of connection unworkability.
+
+@item
+@command{nncp-toss} uses lock-file to prevent simultaneous tossing.
+
+@end itemize
+
+@node Release 5_2_1
+@section Release 5.2.1
+@itemize
+
+@item
+Fixed SP protocol error handling, sometimes causing program panic.
+
+@end itemize
+
+@node Release 5_2_0
+@section Release 5.2.0
+@itemize
+
+@item
+Most commands by default show oneline operations progress.
+@option{-progress}, @option{-noprogress} command line options,
+@option{noprogress} configuration file option appeared.
+
+@item
+Fixed incorrect @command{nncp-check} command return code, that returned
+bad code when everything is good.
+
+@item
+Free disk space check during @command{nncp-bundle -rx} call.
+
+@end itemize
+
+@node Release 5_1_2
+@section Release 5.1.2
+@itemize
+
+@item
+@strong{Critical} vulnerability: remote peers authentication could lead
+to incorrect identification of remote side, allowing foreign encrypted
+packets downloading.
+
+@item
+Bugfix: private and public Noise keys were swapped in newly created
+configuration files, that lead to inability to authenticate online peers.
+
+@item
+Explicit directories @code{fsync}-ing for guaranteed files renaming.
+
+@end itemize
+
+@node Release 5_1_1
+@section Release 5.1.1
+@itemize
+
+@item
+Fixed workability of @command{nncp-file} with @option{-chunked 0} option.
+
+@end itemize
+
+@node Release 5_1_0
+@section Release 5.1.0
+@itemize
+
+@item
+@command{nncp-file} can send directories, automatically creating pax
+archive on the fly.
+
+@item
+Free disk space is checked during outbound packets creation.
+
+@item
+@option{freq}, @option{freqminsize}, @option{freqchunked} configuration
+file options replaced with the structure:
+@option{freq: @{path: @dots{}, minsize: @dots{}, chunked: @dots{}@}}.
+
+@item
+Added @option{freq.maxsize} configuration file option, forbidding of
+freq sending larger than specified size.
+
+@item
+Ability to notify about successfully executed commands (exec) with
+@option{notify.exec} configuration file option.
+
+@end itemize
+
+@node Release 5_0_0
+@section Release 5.0.0
+@itemize
+
+@item
+@strong{Incompatible} configuration file format change: YAML is
+replaced with Hjson, due to its simplicity, without noticeable lack
+of either functionality or convenience.
+
+@item
+@strong{Incompatible} plain packet format changes. Older versions are
+not supported. @code{zlib} compression is replaced with
+@code{Zstandard}, due to its speed and efficiency, despite library
+version is not mature enough.
+
+@item
+Ability to call remote nodes via pipe call of external command, not only
+through TCP.
+
+@item
+@command{nncp-cfgnew} generates configuration file with many
+comments. @option{-nocomments} option can be used for an old
+behaviour.
+
+@item
+Duplicate filenames have @file{.CTR} suffix, instead of @file{CTR}, to
+avoid possible collisions with @file{.nncp.chunkCTR}.
+
+@item
+Ability to override process umask through configuration file option.
+
+@item
+Files and directories are created with 666/777 permissions by default,
+allowing control with @command{umask}.
+
+@item
+Updated dependencies.
+
+@item
+Full usage of go modules for dependencies management
+(@code{go.cypherpunks.ru/nncp/v5} namespace is used).
+
+@item
+Forbid any later GNU GPL version autousage
+(project's licence now is GNU GPLv3-only).
+
+@end itemize
+
+@node Release 4_1
+@section Release 4.1
+@itemize
+@item Workability on GNU/Linux systems and Go 1.10 is fixed.
+@end itemize
+
+@node Release 4_0
+@section Release 4.0
+@itemize
+
+@item
+@strong{Incompatible} encrypted and eblob packet format change: AEAD
+encryption mode with 128 KiB blocks is used now, because previously
+@command{nncp-toss} did not verify encrypted packet's MAC before feeding
+decrypted data to external command. Older versions are not supported.
+
+@item
+Available free space checking before copying in @command{nncp-xfer},
+@command{nncp-daemon}, @command{nncp-call(er)}.
+
+@item
+@command{nncp-call} has ability only to list packets on remote node,
+without their transmission.
+
+@item
+@command{nncp-call} has ability to transfer only specified packets.
+
+@item
+Workability of @option{xxrate} preference in @option{calls}
+configuration file section.
+
+@item
+Dependant libraries are updated.
+
+@item
+Minor bugfixes.
+
+@item
+Begin using of @code{go.mod} subsystem.
+
+@end itemize
+
+@node Release 3_4
+@section Release 3.4
+@itemize
+@item @command{nncp-daemon} can be run as @command{inetd}-service.
+@end itemize
+
+@node Release 3_3
@section Release 3.3
@itemize
+
@item
@command{nncp-daemon}, @command{nncp-call}, @command{nncp-caller} check
if @file{.seen} exists and treat it like file was already downloaded.
Possibly it was transferred out-of-bound and remote side needs to be
notifier about that.
+
+@item
+If higher priority packet is spooled, then @command{nncp-daemon} will
+queue its sending first, interrupting lower priority transmissions.
+
+@item
+Simple packet rate limiter added to online-related tools
+(@command{nncp-daemon}, @command{nncp-call}, @command{nncp-caller}).
+
+@item
+Ability to specify niceness with symbolic notation:
+@verb{|NORMAL|}, @verb{|BULK+10|}, @verb{|PRIORITY-5|}, etc.
+
+@item
+Changed default niceness levels:
+for @command{nncp-exec} from 64 to 96,
+for @command{nncp-freq} from 64 to 160,
+for @command{nncp-file} from 196 to 224.
+
@end itemize
-@node Release 3.2
+@node Release 3_2
@section Release 3.2
@itemize
@item
archives.
@end itemize
-@node Release 3.1
+@node Release 3_1
@section Release 3.1
@itemize
@item
Ability to disable relaying at all using @verb{|-via -|} command line option.
@end itemize
-@node Release 3.0
+@node Release 3_0
@section Release 3.0
@itemize
+
@item
@strong{Incompatible} plain packet format changes. Older versions are
not supported.
+
@item
Ability to queue remote command execution, by configuring @option{exec}
option in configuration file and using @command{nncp-exec} command:
you must use @verb{|nncp-exec NODE sendmail RECIPIENT|}.
@item
@option{sendmail} configuration file option is replaced with
- @option{exec}. @verb{|sendmail: [...]|} must be replaced with
- @verb{|exec: sendmail: [...]|}.
+ @option{exec}. @code{sendmail: [@dots{}]} must be replaced with
+ @code{exec: sendmail: [@dots{}]}.
@end itemize
+
@item
Ability to override @option{via} configuration option for destination
node via @option{-via} command line option for following commands:
@command{nncp-file}, @command{nncp-freq}, @command{nncp-exec}.
+
@item
Chunked files, having size less than specified chunk size, will be sent
as an ordinary single file.
+
@item
-Exec commands are invoked with additional @env{NNCP_NICE} and
-@env{NNCP_SELF} environment variables.
+Exec commands are invoked with additional @env{$NNCP_NICE} and
+@env{$NNCP_SELF} environment variables.
+
@item
Files, that are sent as a reply to freq, have niceness level taken from
the freq packet. You can set desired niceness during @command{nncp-freq}
invocation using @option{-replynice} option.
+
@item
@command{nncp-toss} command can ignore specified packet types during
processing: @option{-nofile}, @option{-nofreq}, @option{-noexec},
@option{-notrns}.
+
@item
@command{nncp-file} command uses
-@option{FreqMinSize}/@option{FreqChunked} conifiguration file options
+@option{FreqMinSize}/@option{FreqChunked} configuration file options
for @option{-minsize}/@option{-chunked} by default. You can turn this
off by specifying zero value.
+
@end itemize
-@node Release 2.0
+@node Release 2_0
@section Release 2.0
@itemize
+
@item
@strong{Incompatible} encrypted/eblob packet format changes. Older
versions are not supported.
+
@item
Twofish encryption algorithm is replaced with ChaCha20. It is much more
faster. One cryptographic primitive less.
+
@item
HKDF-BLAKE2b-256 KDF algorithm is replaced with BLAKE2Xb XOF. Yet
another cryptographic primitive less (assuming that BLAKE2X is nearly
identical to BLAKE2).
+
@end itemize
-@node Release 1.0
+@node Release 1_0
@section Release 1.0
@itemize
+
@item
@strong{Incompatible} encrypted packet format changes. Older versions
are not supported.
+
@item
@command{nncp-bundle} command can either create stream of encrypted
-packets, or digest it. It is useful when dealing with stdin/stdout based
-transmission methods (like writing to CD-ROM without intermediate
-prepared ISO image and working with tape drives).
+packets, or digest it. It is useful when dealing with
+@code{stdin}/@code{stdout} based transmission methods (like writing to
+CD-ROM without intermediate prepared ISO image and working with tape
+drives).
+
@item
@command{nncp-toss} is able to create @file{.seen} files preventing
duplicate packets receiving.
+
@item
Single background checksum verifier worker is allowed in
@command{nncp-call}. This is helpful when thousands of small inbound
packets could create many goroutines.
+
@item
Ability to override path to spool directory and logfile through either
command line argument, or environment variable.
+
@item
@command{nncp-rm} is able to delete outbound/inbound, @file{.seen},
@file{.part}, @file{.lock} and temporary files.
+
@end itemize
-@node Release 0.12
+@node Release 0_12
@section Release 0.12
@itemize
-@item
-Sendmail command is called with @env{NNCP_SENDER} environment variable.
+@item Sendmail command is called with @env{$NNCP_SENDER} environment variable.
@end itemize
-@node Release 0.11
+@node Release 0_11
@section Release 0.11
@itemize
-@item
-@command{nncp-stat}'s command output is sorted by node name.
+@item @command{nncp-stat}'s command output is sorted by node name.
@end itemize
-@node Release 0.10
+@node Release 0_10
@section Release 0.10
@itemize
@item
@file{SRC} path's element will be used by default.
@end itemize
-@node Release 0.9
+@node Release 0_9
@section Release 0.9
@itemize
@item
@command{nncp-call} command. They were ignored.
@end itemize
-@node Release 0.8
+@node Release 0_8
@section Release 0.8
@itemize
@item
option for unchunked transfer was not in KiBs, but in bytes.
@end itemize
-@node Release 0.7
+@node Release 0_7
@section Release 0.7
@itemize
+
@item
-Ability to feed @command{nncp-file} from stdin, that uses an encrypted
-temporary file for that.
+Ability to feed @command{nncp-file} from @code{stdin}, that uses an
+encrypted temporary file for that.
@item
Chunked files transmission appeared with corresponding
@item
Cryptographic libraries (dependencies) are updated.
+
@end itemize
-@node Release 0.6
+@node Release 0_6
@section Release 0.6
@itemize
@item Small @command{nncp-rm} command appeared.
@item Cryptographic libraries (dependencies) are updated.
@end itemize
-@node Release 0.5
+@node Release 0_5
@section Release 0.5
@itemize
-@item Trivial small fix in default niceness level of @command{nncp-file}
+@item
+Trivial small fix in default niceness level of @command{nncp-file}
and @command{nncp-freq} commands.
@end itemize
-@node Release 0.4
+@node Release 0_4
@section Release 0.4
@itemize
-@item Small fix in @command{nncp-call}, @command{nncp-caller},
+
+@item
+Small fix in @command{nncp-call}, @command{nncp-caller},
@command{nncp-daemon}: they can segmentation fail sometimes (no data is
lost).
-@item @command{nncp-newnode} renamed to @command{nncp-newcfg} -- it is
-shorter and more convenient to use.
-@item @command{nncp-mincfg} command appeared: helper allowing to create
-minimalistic stripped down configuration file without private keys,
-that is useful during @command{nncp-xfer} usage.
+
+@item
+@command{nncp-newnode} renamed to @command{nncp-newcfg} -- it is shorter
+and more convenient to use.
+
+@item
+@command{nncp-mincfg} command appeared: helper allowing to create
+minimalistic stripped down configuration file without private keys, that
+is useful during @command{nncp-xfer} usage.
+
@end itemize
-@node Release 0.3
+@node Release 0_3
@section Release 0.3
-Fixed compatibility with Go 1.6.
+@itemize
+@item Fixed compatibility with Go 1.6.
+@end itemize
-@node Release 0.2
+@node Release 0_2
@section Release 0.2
@itemize
-@item @strong{Incompatible} packet's format change (magic number is
-changed too): size field is encrypted and is not send in plaintext
-anymore.
-@item @option{-minsize} option gives ability to automatically pad
-outgoing packets to specified minimal size.
-@item @command{nncp-daemon} and
-@command{nncp-call}/@command{nncp-caller} always check new @emph{tx}
-packets appearance in the background while connected. Remote side is
-immediately notified.
-@item @option{-onlinedeadline} option gives ability to configure timeout
-of inactivity of online connection, when it could be disconnected. It
-could be used to keep connection alive for a long time.
-@item @option{-maxonlinetime} option gives ability to set maximal
-allowable online connection aliveness time.
-@item @command{nncp-caller} command appeared: cron-ed TCP daemon caller.
-@item @command{nncp-pkt} command can decompress the data.
+
+@item
+@strong{Incompatible} packet's format change (magic number is changed
+too): size field is encrypted and is not send in plaintext anymore.
+
+@item
+@option{-minsize} option gives ability to automatically pad outgoing
+packets to specified minimal size.
+
+@item
+@command{nncp-daemon} and @command{nncp-call}/@command{nncp-caller}
+always check new @emph{tx} packets appearance in the background while
+connected. Remote side is immediately notified.
+
+@item
+@option{-onlinedeadline} option gives ability to configure timeout of
+inactivity of online connection, when it could be disconnected. It could
+be used to keep connection alive for a long time.
+
+@item
+@option{-maxonlinetime} option gives ability to set maximal allowable
+online connection aliveness time.
+
+@item
+@command{nncp-caller} command appeared: cron-ed TCP daemon caller.
+
+@item
+@command{nncp-pkt} command can decompress the data.
+
@end itemize