@node News
+@cindex news
@unnumbered News
See also this page @ref{Новости, on russian}.
+@node Release 8_7_0
+@section Release 8.7.0
+@itemize
+
+@item
+@command{nncp-ack} previously did not remove corresponding @file{hdr/} files.
+
+@end itemize
+
+@node Release 8_6_0
+@section Release 8.6.0
+@itemize
+
+@item
+@command{nncp-xfer} checks if locally copied packet's checksum differs
+from the source's one.
+
+@item
+@command{nncp-call} has bad return code if its queues contain unfinished jobs.
+
+@item
+@command{nncp-ack} command appeared, that sends explicit packet receipt
+acknowledgement (ACK packet). That acknowledgement deletes referenced
+packet from the outbound spool.
+
+@item
+Ability to turn @code{fsync} operation off using @env{$NNCPNOSYNC=1}
+environment variable.
+
+@item
+Added various indices in documentation, that should help searching in it.
+
+@end itemize
+
+@node Release 8_5_0
+@section Release 8.5.0
+@itemize
+
+@item
+Fixed @command{nncp-bundle} workability.
+
+@item
+Mistakenly @option{-mcd-wait} option was enabled by default in
+@command{nncp-call}.
+
+@item
+Ability to override internal default timeout for online protocol through
+@env{$NNCPDEADLINE} environment variable. Can be useful for very high
+delay links.
+
+@item
+NNCP builds on OpenBSD.
+
+@end itemize
+
+@node Release 8_4_0
+@section Release 8.4.0
+@itemize
+
+@item
+Multicast related interface names (@code{mcd-listen} and @code{mcd-send}
+configuration options) are now regular expressions. By default
+@command{nncp-cfgnew} uncomments them now with @code{.*} interface name.
+
+@item
+@command{nncp-call} command has @option{-mcd-wait} option to wait for
+multicast packet about node's address.
+
+@item
+@command{nncp-file} command skips everything that is neither regular
+file nor directory during pax-archive creation.
+
+@end itemize
+
+@node Release 8_3_0
+@section Release 8.3.0
+@itemize
+
+@item
+Fixed building issues on 32-bit systems.
+
+@end itemize
+
+@node Release 8_2_0
+@section Release 8.2.0
+@itemize
+
+@item
+Yggdrasil uses pure-Go IPv6+TCP network stack, instead of naked μTP
+transport protocol, making it able to work as an ordinary TCP server
+inside overlay network.
+
+@item
+Yggdrasil's @code{prv;bind1,bind2;pub@dots{}}-like configuration strings are
+replaced with URL-like ones (@code{yggdrasils://PRV?bind=BIND1&bind=BIND2&pub=PUB}).
+
+@item
+Ability to pass multicast-related parameters to Yggdrasil configuration.
+
+@item
+@command{nncp-daemon} is able to listen on both TCP and Yggdrasil-driven
+sockets simultaneously.
+
+@item
+@command{nncp-daemon}'s listening on peering endpoint socket is optional
+-- you can be reached through the peers.
+
+@end itemize
+
+@node Release 8_1_0
+@section Release 8.1.0
+@itemize
+
+@item
+@command{nncp-cfgdir} does not require @code{self} section existence in
+configuration file.
+
+@item
+Ability to act as Yggdrasil network client, using online protocol on top of it.
+
+@end itemize
+
+@node Release 8_0_2
+@section Release 8.0.2
+@itemize
+
+@item
+Fixed sending ability to areas.
+
+@end itemize
+
+@node Release 8_0_1
+@section Release 8.0.1
+@itemize
+
+@item
+Fixed incorrect @code{freq.chunked} value calculation. If it was missed,
+then chunked transfer mode was forcefully turned on anyway.
+
+@item
+Fixed incorrect full file's size calculation in @file{.nncp.meta}.
+
+@end itemize
+
+@node Release 8_0_0
+@section Release 8.0.0
+@itemize
+
+@item
+@strong{Incompatible} encrypted packet format change: payload and pad
+sizes are sent in-bound in the encrypted stream. That gives ability to
+streamingly create encrypted packets, without knowing sizes in advance,
+without creating temporary file or buffer data in memory.
+
+@item
+Proper encrypted packet padding verification is done now. This is not
+critical issue, but previously neither padding value, nor its size were
+authenticated, giving ability to iteratively strip trailing bytes and
+determine payload's size by observing the reaction of the encrypted
+packet processing.
+
+@item
+@command{nncp-exec} loses its @option{-use-tmp} option, because of
+streaming-compatible encrypted packets format.
+
+@item
+@command{nncp-file} and @command{nncp-exec} commands have
+@option{-maxsize} option, limiting maximal resulting encrypted packet's
+maximal size (returning error if it is exceeded). Could be useful,
+because no payload size could be known in advance.
+
+@end itemize
+
+@node Release 7_7_0
+@section Release 7.7.0
+@itemize
+
+@item
+Experimental @code{kqueue} and @code{inotify} based notifications
+support about spool directory changes, for reducing their often reading
+overhead.
+
+@item
+@file{.seen} and @file{.hdr} files moved to @file{seen/} and @file{hdr/}
+subdirectories, for faster scanning of spool directories.
+Current files migration required:
+
+@example
+$ find $NNCPSPOOL -type f -name "*.hdr" -exec rm @{@} +
+
+$ find $NNCPSPOOL -type d -name rx | while read rx ; do
+ cd $rx
+ mkdir -p seen
+ find . -type f -name "*.seen" | while read fn ; do
+ mv $fn seen/$@{fn%.seen@}
+ done
+done
+
+$ find $NNCPSPOOL -type d -name area | while read area ; do
+ find $area -type f -name "*.seen" | while read fn ; do
+ mv $fn $@{fn%.seen@}
+ done
+done
+@end example
+
+@end itemize
+
+@node Release 7_6_0
+@section Release 7.6.0
+@itemize
+
+@item
+Logging may be done to specified opened file descriptor
+(@env{$NNCPLOG=FD:5} for example).
+That is friendly to use under @command{daemontools}.
+
+@item
+Added additional checks of public keys existence in configuration file,
+preventing some commands from failing.
+
+@end itemize
+
+@node Release 7_5_1
+@section Release 7.5.1
+@itemize
+
+@item
+NNCP builds on NetBSD.
+
+@end itemize
+
+@node Release 7_5_0
+@section Release 7.5.0
+@itemize
+
+@item
+@command{nncp-daemon} is compatible with UCSPI-TCP interface, so log
+will contain remote side's address (when running under appropriate
+utility). @option{-ucspi} option should be used instead of @option{-inetd}.
+
+@item
+@command{nncp-call} can be UCSPI-TCP client, using @option{-ucspi} option.
+
+@item
+Do not exit if some of MCD network interfaces can not be listened --
+only warn about that.
+
+@end itemize
+
+@node Release 7_4_0
+@section Release 7.4.0
+@itemize
+
+@item
+Fixed simultaneous @command{nncp-daemon} and @command{nncp-caller} MCD work.
+
+@end itemize
+
+@node Release 7_3_2
+@section Release 7.3.2
+@itemize
+
+@item
+@command{hjson-cli} utility builds in vendor-mode now.
+
+@end itemize
+
+@node Release 7_3_1
+@section Release 7.3.1
+@itemize
+
+@item
+Fixed possibly left opened file descriptor in online commands.
+
+@item
+Severely decreased memory usage of MTH hashing.
+
+@end itemize
+
+@node Release 7_3_0
+@section Release 7.3.0
+@itemize
+
+@item
+Fixed some workability problems on 32-bit systems with big files.
+
+@item
+Ability to use directory with a bunch of files as a configuration.
+@command{nncp-cfgdir} command appeared.
+
+@end itemize
+
+@node Release 7_2_1
+@section Release 7.2.1
+@itemize
+
+@item
+Small optimizations in online commands.
+
+@end itemize
+
+@node Release 7_2_0
+@section Release 7.2.0
+@itemize
+
+@item
+@command{nncp-trns} command appeared for manual transition packets creation.
+
+@item
+If destination node of transitional packet has non empty @option{via}
+route, then do not ignore, but use it.
+
+@item
+Do not relay multicast packet to area message's originator, that
+obviously has seen its own packet.
+
+@item
+Much less memory usage during MTH hashing when offset is zero: when
+packet is not resumed, but for example checked with @command{nncp-check}
+command.
+
+@end itemize
+
+@node Release 7_1_1
+@section Release 7.1.1
+@itemize
+
+@item
+Fixed failing directories @code{fsync} after @file{.seen} file creation.
+
+@end itemize
+
@node Release 7_1_0
@section Release 7.1.0
@itemize
+@item
+Multicasting areas feature appeared. Implemented merely by an additional
+plain packet type with @command{nncp-toss}, @command{nncp-file} and
+@command{nncp-exec} commands modification.
+
@item
Fixed workability of @command{nncp-file} and @command{nncp-exec}
-commands, that use temporary file (stdin and @option{-use-tmp}).
+commands, that use temporary file (@code{stdin} and @option{-use-tmp}).
@item
Fixed disappearing bad return code in @command{nncp-exec} command.
@item
@command{nncp-pkt} can parse @file{.hdr} files.
-@item
-Multicasting areas feature appeared. Implemented merely by an additional
-plain packet type with @command{nncp-toss}, @command{nncp-file} and
-@command{nncp-exec} commands modification.
-
@end itemize
@node Release 7_0_0
automatic tosser options.
@item
-Use vendoring, instead of @env{GOPATH} overriding during tarball
+Use vendoring, instead of @env{$GOPATH} overriding during tarball
installation, because current minimal Go's version is 1.12 and it
supports modules.
@itemize
@item
-Respect for @env{BINDIR}, @env{INFODIR} and @env{DOCDIR} environment
+Respect for @env{$BINDIR}, @env{$INFODIR} and @env{$DOCDIR} environment
variables in @file{config} during installation.
@end itemize
configuration files, that lead to inability to authenticate online peers.
@item
-Explicit directories fsync-ing for guaranteed files renaming.
+Explicit directories @code{fsync}-ing for guaranteed files renaming.
@end itemize
@item
@option{freq}, @option{freqminsize}, @option{freqchunked} configuration
file options replaced with the structure:
-@option{freq: @{path: ..., minsize: ..., chunked: ...@}}.
+@option{freq: @{path: @dots{}, minsize: @dots{}, chunked: @dots{}@}}.
@item
Added @option{freq.maxsize} configuration file option, forbidding of
you must use @verb{|nncp-exec NODE sendmail RECIPIENT|}.
@item
@option{sendmail} configuration file option is replaced with
- @option{exec}. @verb{|sendmail: [...]|} must be replaced with
- @verb{|exec: sendmail: [...]|}.
+ @option{exec}. @code{sendmail: [@dots{}]} must be replaced with
+ @code{exec: sendmail: [@dots{}]}.
@end itemize
@item
as an ordinary single file.
@item
-Exec commands are invoked with additional @env{NNCP_NICE} and
-@env{NNCP_SELF} environment variables.
+Exec commands are invoked with additional @env{$NNCP_NICE} and
+@env{$NNCP_SELF} environment variables.
@item
Files, that are sent as a reply to freq, have niceness level taken from
@node Release 0_12
@section Release 0.12
@itemize
-@item Sendmail command is called with @env{NNCP_SENDER} environment variable.
+@item Sendmail command is called with @env{$NNCP_SENDER} environment variable.
@end itemize
@node Release 0_11