will be 4 KiB (containing file itself and some junk).
@item -nice
Set desired outgoing packet @ref{Niceness, niceness level}.
- 1-255 values are allowed.
-@item -node
- Process only single specified node.
+@item -replynice
+ Set desired reply packet @ref{Niceness, niceness level}. Only freq
+ and exec packets look at that niceness level.
@item -via
Override @ref{CfgVia, via} configuration option for destination node.
Specified nodes must be separated with comma: @verb{|NODE1,NODE2|}.
+ With @verb{|-via -|} you can disable relaying at all.
@item -spool
Override path to spool directory. May be specified by
@env{NNCPSPOOL} environment variable.
@section nncp-bundle
@verbatim
-% nncp-bundle [options] -tx [-delete] NODE [NODE ...] > ...
-% nncp-bundle [options] -rx -delete [-dryrun] [NODE ...] < ...
-% nncp-bundle [options] -rx [-check] [-dryrun] [NODE ...] < ...
+$ nncp-bundle [options] -tx [-delete] NODE [NODE ...] > ...
+$ nncp-bundle [options] -rx -delete [-dryrun] [NODE ...] < ...
+$ nncp-bundle [options] -rx [-check] [-dryrun] [NODE ...] < ...
@end verbatim
With @option{-tx} option, this command creates @ref{Bundles, bundle} of
spool if everything is good. So it is advisable to recheck your streams:
@verbatim
-% nncp-bundle -tx ALICE BOB WHATEVER | cdrecord -tao -
-% dd if=/dev/cd0 bs=2048 | nncp-bundle -rx -delete
+$ nncp-bundle -tx ALICE BOB WHATEVER | cdrecord -tao -
+$ dd if=/dev/cd0 bs=2048 | nncp-bundle -rx -delete
@end verbatim
-@option{-dryrun} option prevents any writing to the spool. This is
+@option{-dryrun} option prevents any writes to the spool. This is
useful when you need to see what packets will pass by and possibly check
their integrity.
@section nncp-call
@verbatim
-% nncp-call [options] [-onlinedeadline INT] [-maxonlinetime INT] [-rx|-tx]
- NODE[:ADDR] [FORCEADDR]
+$ nncp-call [options]
+ [-onlinedeadline INT]
+ [-maxonlinetime INT]
+ [-rx|-tx]
+ [-list]
+ [-pkts PKT,PKT,...]
+ [-rxrate INT]
+ [-txrate INT]
+ NODE[:ADDR] [FORCEADDR]
@end verbatim
Call (connect to) specified @option{NODE} and run @ref{Sync,
only outbound transmission is performed. @option{-onlinedeadline}
overrides @ref{CfgOnlineDeadline, @emph{onlinedeadline}}.
@option{-maxonlinetime} overrides @ref{CfgMaxOnlineTime,
-@emph{maxonlinetime}}.
+@emph{maxonlinetime}}. @option{-rxrate}/@option{-txrate} override
+@ref{CfgXxRate, rxrate/txrate}. @option{-list} option allows you to list
+packets of remote node, without any transmission.
+
+You can specify what packets your want to download, by specifying
+@option{-pkts} option with comma-separated list of packets identifiers.
@node nncp-caller
@section nncp-caller
@verbatim
-% nncp-caller [options] [NODE ...]
+$ nncp-caller [options] [NODE ...]
@end verbatim
Croned daemon that calls remote nodes from time to time, according to
@section nncp-cfgenc
@verbatim
-% nncp-cfgmin [options] [-s INT] [-t INT] [-p INT] cfg.yaml > cfg.yaml.eblob
-% nncp-cfgmin [options] -d cfg.yaml.eblob > cfg.yaml
+$ nncp-cfgmin [options] [-s INT] [-t INT] [-p INT] cfg.hjson > cfg.hjson.eblob
+$ nncp-cfgmin [options] -d cfg.hjson.eblob > cfg.hjson
@end verbatim
-This command allows you to encrypt provided @file{cfg.yaml} file with
+This command allows you to encrypt provided @file{cfg.hjson} file with
the passphrase, producing @ref{EBlob, eblob}, to safely keep your
configuration file with private keys. This utility was written for users
who do not want (or can not) to use either @url{https://gnupg.org/,
@option{-dump} options parses @file{eblob} and prints parameters used
during its creation. For example:
@verbatim
-% nncp-cfgenc -dump /usr/local/etc/nncp.yaml.eblob
+$ nncp-cfgenc -dump /usr/local/etc/nncp.hjson.eblob
Strengthening function: Balloon with BLAKE2b-256
Memory space cost: 1048576 bytes
Number of rounds: 16
@section nncp-cfgmin
@verbatim
-% nncp-cfgmin [options] > stripped.yaml
+$ nncp-cfgmin [options] > stripped.hjson
@end verbatim
Print out stripped configuration version: only path to @ref{Spool,
@section nncp-cfgnew
@verbatim
-% nncp-cfgnew [options] > new.yaml
+$ nncp-cfgnew [options] [-nocomments] > new.hjson
@end verbatim
Generate new node configuration: private keys, example configuration
file and print it to stdout. You must use this command when you setup
-the new node.
+the new node. @option{-nocomments} will create configuration file
+without descriptive huge comments -- useful for advanced users.
Pay attention that private keys generation consumes an entropy from your
operating system.
@section nncp-check
@verbatim
-% nncp-check [options]
+$ nncp-check [options]
@end verbatim
Perform @ref{Spool, spool} directory integrity check. Read all files
@section nncp-daemon
@verbatim
-% nncp-daemon [options] [-maxconn INT] [-bind ADDR]
+$ nncp-daemon [options] [-maxconn INT] [-bind ADDR] [-inetd]
@end verbatim
Start listening TCP daemon, wait for incoming connections and run
can handle. @option{-bind} option specifies @option{addr:port} it must
bind to and listen.
+It could be run as @command{inetd} service, by specifying
+@option{-inetd} option. Example inetd-entry:
+
+@verbatim
+uucp stream tcp6 nowait nncpuser /usr/local/bin/nncp-daemon nncp-daemon -inetd
+@end verbatim
+
+@node nncp-exec
+@section nncp-exec
+
+@verbatim
+$ nncp-exec [options] NODE HANDLE [ARG0 ARG1 ...]
+@end verbatim
+
+Send execution command to @option{NODE} for specified @option{HANDLE}.
+Body is read from stdin and compressed. After receiving, remote side
+will execute specified @ref{CfgExec, handle} command with @option{ARG*}
+appended and decompressed body fed to command's stdin.
+
+For example, if remote side has following configuration file for your
+node:
+
+@verbatim
+exec: {
+ sendmail: [/usr/sbin/sendmail, "-t"]
+ appender: ["/bin/sh", "-c", "cat >> /append"]
+}
+@end verbatim
+
+then executing @verb{|echo My message | nncp-exec -replynice 123 REMOTE
+sendmail root@localhost|} will lead to execution of:
+
+@verbatim
+echo My message |
+ NNCP_SELF=REMOTE \
+ NNCP_SENDER=OurNodeId \
+ NNCP_NICE=123 \
+ /usr/sbin/sendmail -t root@localhost
+@end verbatim
+
+
@node nncp-file
@section nncp-file
@verbatim
-% nncp-file [options] [-chunked INT] SRC NODE:[DST]
+$ nncp-file [options] [-chunked INT] SRC NODE:[DST]
@end verbatim
Send @file{SRC} file to remote @option{NODE}. @file{DST} specifies
If @file{SRC} equals to @file{-}, then create an encrypted temporary
file and copy everything taken from stdin to it and use for outbound
packet creation. Pay attention that if you want to send 1 GiB of data
-taken from stdin, then you have to have 2 GiB of disk space for that
-temporary file and resulting encrypted packet. You can control where
-temporary file will be stored using @env{TMPDIR} environment variable.
-Encryption is performed with @url{https://cr.yp.to/chacha.html,
-ChaCha20} algorithm. Data is splitted on 128 KiB blocks. Each block is
-encrypted with increasing nonce counter.
+taken from stdin, then you have to have more than 2 GiB of disk space
+for that temporary file and resulting encrypted packet. You can control
+where temporary file will be stored using @env{TMPDIR} environment
+variable. Encryption is performed in AEAD mode with
+@url{https://cr.yp.to/chacha.html, ChaCha20}-@url{https://en.wikipedia.org/wiki/Poly1305, Poly1305}
+algorithms. Data is splitted on 128 KiB blocks. Each block is encrypted
+with increasing nonce counter.
If @option{-chunked} is specified, then source file will be split
@ref{Chunked, on chunks}. @option{INT} is the desired chunk size in
@section nncp-freq
@verbatim
-% nncp-freq [options] NODE:SRC [DST]
+$ nncp-freq [options] NODE:SRC [DST]
@end verbatim
Send file request to @option{NODE}, asking it to send its @file{SRC}
@section nncp-log
@verbatim
-% nncp-log [options]
+$ nncp-log [options]
@end verbatim
Parse @ref{Log, log} file and print out its records in human-readable form.
-@node nncp-mail
-@section nncp-mail
-
-@verbatim
-% nncp-mail [options] NODE USER ...
-@end verbatim
-
-Send mail, that is read from stdin, to @option{NODE} and specified
-@option{USER}s. Mail message will be compressed. After receiving, remote
-side will execute specified @ref{CfgSendmail, sendmail} command with
-@option{USER}s appended as a command line argument and feed decompressed
-mail body to that command's stdin.
-
@node nncp-pkt
@section nncp-pkt
@verbatim
-% nncp-pkt [options] < pkt
-% nncp-pkt [options] [-decompress] -dump < pkt > payload
+$ nncp-pkt [options] < pkt
+$ nncp-pkt [options] [-decompress] -dump < pkt > payload
+$ nncp-pkt -overheads
@end verbatim
Low level packet parser. Normally it should not be used, but can help in
tries to zlib-decompress the data from plain packet (useful for mail
packets).
+@option{-overheads} options print encrypted, plain and size header overheads.
+
@node nncp-reass
@section nncp-reass
@verbatim
-% nncp-reass [options] [-dryrun] [-keep] [-dump] [-stdout] FILE.nncp.meta
-% nncp-reass [options] [-dryrun] [-keep] {-all | -node NODE}
+$ nncp-reass [options] [-dryrun] [-keep] [-dump] [-stdout] FILE.nncp.meta
+$ nncp-reass [options] [-dryrun] [-keep] {-all | -node NODE}
@end verbatim
Reassemble @ref{Chunked, chunked file} after @ref{nncp-toss, tossing}.
@section nncp-rm
@verbatim
-% nncp-rm [options] -tmp
-% nncp-rm [options] -lock
-% nncp-rm [options] -node NODE -part
-% nncp-rm [options] -node NODE -seen
-% nncp-rm [options] -node NODE [-rx] [-tx]
-% nncp-rm [options] -node NODE -pkt PKT
+$ nncp-rm [options] -tmp
+$ nncp-rm [options] -lock
+$ nncp-rm [options] -node NODE -part
+$ nncp-rm [options] -node NODE -seen
+$ nncp-rm [options] -node NODE [-rx] [-tx]
+$ nncp-rm [options] -node NODE -pkt PKT
@end verbatim
This command is aimed to delete various files from your spool directory:
@section nncp-stat
@verbatim
-% nncp-stat [options]
+$ nncp-stat [options] [-node NODE]
@end verbatim
Print current @ref{Spool, spool} statistics about unsent and unprocessed
-packets. For each node and each niceness level there will be printed how
-many packets (with the total size) are in inbound (Rx) and outbound (Tx)
-queues.
+packets. For each node (unless @option{-node} specified) and each
+niceness level there will be printed how many packets (with the total
+size) are in inbound (Rx) and outbound (Tx) queues.
@node nncp-toss
@section nncp-toss
@verbatim
-% nncp-toss [options] [-dryrun] [-cycle INT] [-seen]
+$ nncp-toss [options]
+ [-node NODE]
+ [-dryrun]
+ [-cycle INT]
+ [-seen]
+ [-nofile]
+ [-nofreq]
+ [-noexec]
+ [-notrns]
@end verbatim
Perform "tossing" operation on all inbound packets. This is the tool
running this command as a daemon.
@option{-seen} option creates empty @file{XXX.seen} file after
-successful tossing of @file{XXX} packet. @ref{nncp-xfer} and
-@ref{nncp-bundle} commands skip inbound packets that has been already
-seen, processed and tossed. This is helpful to defeat duplicates.
+successful tossing of @file{XXX} packet. @ref{nncp-xfer},
+@ref{nncp-bundle}, @ref{nncp-daemon} and @ref{nncp-call} commands skip
+inbound packets that has been already seen, processed and tossed. This
+is helpful to prevent duplicates.
+
+@option{-nofile}, @option{-nofreq}, @option{-noexec}, @option{-notrns}
+options allow to disable any kind of packet types processing.
@node nncp-xfer
@section nncp-xfer
@verbatim
-% nncp-xfer [options] [-mkdir] [-keep] [-rx|-tx] DIR
+$ nncp-xfer [options] [-node NODE] [-mkdir] [-keep] [-rx|-tx] DIR
@end verbatim
Search for directory in @file{DIR} containing inbound packets for us and