@node PPP
@section Serial connection

It is not trivial to run online @command{nncp-daemon},
@command{nncp-call} and @command{nncp-caller} commands over the serial
link, because it is link without built-in error detection. For efficient
usage you have to use some kind of window-sliding error correction
protocol, like Kermit, ZMODEM, UUCP's g-protocol and similar well known
ones.

However TCP is already satisfying and existing protocol for the same
purposes. So it would be more easier to bring up the IP interconnection
and use TCP over it. Most distributions already have
@url{https://en.wikipedia.org/wiki/Point-to-point_protocol, PPP}
protocol out-of-box.

Ordinary man page for @command{ppp} in FreeBSD is enough for being able
to setup it:

@itemize

@item Enable PPP-aware default terminal to run @command{ppplogin} script:

@example
/etc/gettytab:
    default:pp=/usr/local/bin/ppplogin:@dots{}
@end example

@example
/usr/local/bin/ppplogin:
    #!/bin/sh
    exec /usr/sbin/ppp -direct incoming
@end example

@item Enable listening on necessary UART:

@example
/etc/ttys:
    ttyU0 "/usr/libexec/getty 3wire.115200" vt100 on
@end example

@item
Create @code{incoming} PPP profile, allowing authenticated @code{ppp}
user to log in:

@example
/etc/ppp/ppp.conf:
    incoming:
        allow ppp
        disable deflate pred1 mppe protocomp vjcomp ipcp dns
        enable lqr # null-modem cables might not have carrier detection
/etc/ppp/ppp.secret:
    ppp	PASSWORD
@end example

@item
Configure PPP client to access that server:

@example
/etc/ppp/ppp.conf:
    outgoing:
        set device /dev/cuaU0
        set speed 115200
        set dial
        set login
        set authname ppp
        set authkey PASSWORD
        disable deflate pred1 mppe protocomp vjcomp ipcp dns
        enable lqr
@end example

@end itemize

That configuration does not negotiate any kind of IPv4 addresses,
routing or DNS servers. Also all compression is turned off, because
NNCP's traffic is encrypted and uncompressible. Only IPV6CP will
negotiate IPv6 link-local addresses, on which you can run @ref{MCD,
multicast discovered} daemons for simplicity.